The most common dashboard resets on a 2016 Honda CR-V involve the Maintenance Minder (oil life) and the Tire Pressure Monitoring System (TPMS); there isn’t a single universal button to reset every light.
Below are step-by-step instructions for resetting the Maintenance Minder and the TPMS, plus notes on what to do if other warning lights appear and when you should seek professional help.
Resetting the Maintenance Minder (Oil Life)
Use these steps to reset the oil-life indicator when you’ve changed the oil or completed a maintenance interval. This is the standard, user-accessible reset for the CR-V’s Maintenance Minder system.
- Turn the ignition to ON (II) with the engine OFF.
- On the instrument panel, press the SELECT/RESET knob until the screen shows “MAINTENANCE INFO” or “OIL LIFE.”
- Scroll to “OIL LIFE” and press and hold the SELECT/RESET knob for about 5 seconds until the display shows “OIL LIFE 100%” (or a similar reset message).
- Turn the ignition OFF, then start the engine to verify the oil life is reset to 100%.
After completing the steps, the oil-life reading should return to 100% and the maintenance due message should be cleared for the new interval. If the display doesn’t reset, repeat the steps or consult a Honda dealer for assistance.
Resetting the Tire Pressure Monitoring System (TPMS)
Resetting or relearning TPMS is typically needed after inflating tires to the correct pressures or after replacing tires/sensors. The CR-V’s TPMS often relearns automatically after proper tire pressures are detected and you drive the car; some situations may require a manual relearn.
- Check and inflate all four tires (and the spare, if applicable) to the recommended pressures shown on the door placard or in the owner’s manual.
- Start the engine and drive at highway speeds (about 50 mph / 80 km/h or higher) for 10–20 minutes to allow the system to relearn the sensor IDs.
- Return to normal driving and confirm the TPMS warning light turns off. If the light remains on after driving, recheck pressures and inspect sensors for damage or loss; a tire shop or dealer may need to diagnose or reprogram the system with a TPMS tool.
Note: If you recently replaced tires or sensors, or if a sensor is faulty, the TPMS light may require a professional reset or sensor replacement.
Other dashboard lights: what to know
Some warning lights (such as Check Engine, ABS, SRS/airbag, or brake-system warnings) do not have a simple “reset” button. If such lights come on, address the underlying issue as indicated in the owner’s manual, and seek professional diagnosis if the light persists. Clearing those lights without addressing the root cause can mask a real problem.
Summary
For a 2016 Honda CR-V, the most common dashboard-light resets involve the Maintenance Minder oil life and the TPMS. Resetting the oil life is done through the instrument panel with the SELECT/RESET knob, while TPMS is typically addressed by ensuring proper tire pressures and driving to allow the system to relearn. There is no single master reset that clears all lights; persistent warnings should be checked against the owner’s manual or by a qualified technician.