Replacing the wipers on a 2019 Hyundai Elantra is a straightforward DIY task: remove the old blades, install new ones of the correct size and connector type, and test their sweep for clear visibility.
What you’ll need
Gather the right blades and basic supplies before you start to ensure a smooth, safe replacement.
- Replacement windshield wiper blades: driver-side 26 inches; passenger-side 16 inches
- Blade adapters or a universal blade kit if your arms use a non-hook connector
- Microfiber cloth or lint-free wipe for cleaning the mounting area
- Glass cleaner or isopropyl alcohol for the blade and windshield contact points
- Optional: gloves for grip and cleanliness
With the correct blades on hand, you’re ready to proceed with the replacement. Always verify the blade length and connector type on the packaging or by comparing to the old blades.
Step-by-step replacement
Follow these steps to replace the blades on your Elantra without damaging the arms or glass.
- Park the car in a safe, level spot, turn off the engine, and gently lift the wiper arms away from the windshield so the blades stand up.
- Locate the blade’s release mechanism on the adaptor (a small tab or button) and press or slide it to release the blade from the arm.
- Remove the old blade by sliding it away from the connector (toward the end of the arm) until it clears the hook or pin.
- Compare the new blade with the old one to confirm correct length (26" driver, 16" passenger) and connector type.
- Attach the new blade: align the adaptor with the wiper arm’s connector. For hook-style arms, slide the blade onto the hook until you hear a click; for pin-style connectors, insert and secure with the locking tab.
- Gently lower the wiper arm back onto the windshield, keeping the blade aligned to avoid chipping the glass.
- Repeat on the other side, then test the wipers: run them at low speed to ensure a smooth sweep and check for streaking. If needed, reseat or replace a blade.
With both blades installed and tested, your windshield should clear effectively. Regular inspection and replacement every 6–12 months (or sooner in harsh climates) will help maintain optimal visibility.
Tips and cautions
Choosing the right size and connector
Most 2019 Hyundai Elantra front wipers use a 26-inch blade on the driver’s side and a 16-inch blade on the passenger side. Confirm the connector type on your current blades (hook, pin, or other) and purchase blades with the matching adaptor or a universal kit suited to your arm style.
Summary
Replacing the windshield wipers on a 2019 Hyundai Elantra is quick and affordable. Verify the blade lengths (26" and 16"), choose the correct connector type, carefully remove the old blades, attach the new ones until they click or lock, and test the sweep to ensure a clean wipe. Regular replacement helps maintain clear visibility in all weather conditions.