Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How to replace rear wiper on 2015 Escape?

Replacing the rear wiper blade on a 2015 Ford Escape is a straightforward DIY task. Lift the wiper arm, detach the old blade from the mounting, attach a new blade with the correct adapter, and test to ensure proper operation.


The 2015 Escape uses a small rear wiper blade mounted to a rear hatch arm. The replacement process depends on the blade’s mounting style, which is usually a quick-release tab, a bayonet/rotating adapter, or a pin-and-clip design. This guide walks you through identifying the mounting style, removing the old blade, installing the new one, and verifying proper function.


What you’ll need


Gathering the right parts and simple tools beforehand helps the replacement go smoothly.



  • Replacement rear wiper blade compatible with the 2015 Ford Escape (check the blade length on your current blade or in the owner's manual).

  • Adapter kit if your replacement blade uses a different mounting style than the factory arm.

  • Clean cloth and glass cleaner for wiping the area around the wiper arm.

  • Optional: small flat-head screwdriver or plastic trim tool to help release tabs without scratching glass.


Using the correct blade and adapter ensures a secure fit and clean wipe across the rear window.


Removing the old blade


Identify and follow the blade’s release method to detach it from the wiper arm.



  • Gently lift the rear wiper arm away from the glass until it stays in a stable, upright position.

  • Inspect the connection at the end of the blade to determine the mounting style (common options are quick-release tab, bayonet/rotating, or a pin-and-clip).

  • For a quick-release or bayonet-type: press or lift the release tab and slide the blade off the arm.

  • For a J-hook or pin style: rotate the blade a small amount (often about 90 degrees) or release the pin/clip, then pull the blade straight off the arm.


Take care to avoid bending the wiper arm or scratching the glass during removal.


Installing the new blade


Attach the new blade using the correct adapter and ensure it is seated firmly.



  • Confirm the new blade matches the old one in length and mounting style; attach the adapter if required.

  • Align the blade with the wiper arm and slide or snap it into place until you hear or feel a secure click.

  • Lower the wiper arm back onto the glass slowly to avoid nicks or misalignment.


A properly installed blade should rest flush against the glass and wipe evenly without gaps or streaks.


Testing and final checks


Test the rear wiper to confirm correct operation and parking position.



  • Turn on the rear wiper from inside the vehicle and observe that it parks correctly and clears the window without skipping or streaking.

  • Listen for unusual noises or resistance; if detected, recheck the installation and blade seating.


Sound operation and proper parking indicate a successful replacement.


Tips on choosing the right blade and maintaining your wiper


Choosing the correct blade and maintaining it helps ensure clear visibility and long service life.



  • Purchase a blade that is specified for the 2015 Ford Escape rear window or a universal blade listed as compatible with hatchback rear wipers.

  • Avoid over-tightening fittings and refrain from applying lubricants to the blade surface, which can reduce contact with the glass.


Regular inspection for cracks, stiffness, or hard edges will help you catch wear before it affects visibility.


Summary


Replacing the rear wiper on a 2015 Ford Escape is a quick, DIY-friendly task. With the right blade, careful removal, and a proper fit, you can restore clear rear visibility in rain or snow. Always verify compatibility, follow the blade’s release mechanism, and test the wiper after installation. Regular maintenance will help ensure dependable performance over time.

What size rear wiper blade for 2015 Ford Escape?


Ford Escape

Model YearDriverRear
2010 to 201220″12″
2013 to 201928″11″
2020 to 202524″12″



How to replace a 2015 rear wiper?


So what I've done is I've placed the cloth down to protect the rear window. So when I pull this off it's not going to scratch it. And it's simply pulling it until it's vertical.



How do you change the rear wiper on a 2015 Ford Escape?


Slide it up slightly. Then you can grab the blade. Try to pop it. Off. If you're struggling with that just take a straight blade screwdriver. You can get underneath the blade.



Can I remove wiper arms without a special tool?


I often remove wiper arms using a wrench, when I haven't got any locking pliers around.


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.