The engine typically requires about 4.5 quarts (4.3 liters) of engine oil when performing a full change with a filter. If you omit the filter, the capacity is around 4.0 quarts (3.8 liters).
Understanding the exact capacity for a given 2.4 L Chrysler 200 depends on the specific engine variant and model year. The 2.4 L engines used in the Chrysler 200 are part of the Tigershark/World family, and small differences between years or configurations can affect the precise figure. Always consult your owner’s manual or service manual for the exact specification for your car.
Engine variants and official capacity
Because there are a few minor variants of the 2.4 L engine used in the Chrysler 200, the following figures reflect typical numbers you may encounter when looking up oil capacity information.
- 2.4L Tigershark (World) engine with oil filter: 4.5 quarts (4.3 L).
- 2.4L engine capacity without filter: about 4.0 quarts (3.8 L).
These figures represent common reference points; exact capacity can vary by year, market, or specific engine calibration. Always verify with the owner's manual for your exact vehicle.
Recommended oil grade and visibility of specifications
For most 2.4 L engines in this family, synthetic oil in the range of 5W-20 or 5W-30 is commonly recommended, depending on climate and model year. Always use the oil specification listed in your owner's manual (for example API SN or newer). Using the correct oil helps protect engine components and maintain performance.
Summary
In short, plan on roughly 4.5 quarts (4.3 liters) of oil for a full change with a filter on a 2.4 L Chrysler 200, with about 4.0 quarts (3.8 liters) if you’re not changing the filter. Verify the exact figure for your year and engine variant in the owner’s manual, and choose the recommended viscosity accordingly.