For a 2017 Chevy Cruze, the thermostat part itself typically costs between roughly $15 and $60 in aftermarket form, while an OEM part from Chevrolet/Delphi can run about $25–$100. Labor to replace it is usually around $80–$250 depending on shop rates and whether the job includes coolant and hose work. Prices vary by region and retailer, and this guide breaks down what you can expect when shopping for the thermostat and related parts.
What affects the price
Several factors influence the final price: the engine variant (the Cruze’s 1.4L turbo is common for 2017 models), whether you buy an aftermarket thermostat or an OEM (Delco) unit, whether you replace just the stat or include the housing, coolant, and seals, and the labor rate at your chosen shop. Regional price differences and whether you buy online or in person also play a big role.
Typical price ranges for parts
The following ranges show common options you may encounter when shopping for a 2017 Cruze thermostat.
- Aftermarket thermostat only (no housing): about $10–$40
- OEM Delco thermostat (engine-specific): about $25–$60
- Thermostat kit with gasket or housing included: about $40–$100
Prices vary by retailer and region, and some kits may include additional components or cooling-system fittings. Always verify the exact part number matches your Cruze’s engine code before purchase.
Prices by source
Below are typical ranges for buying parts and having them installed by different channels. Use these as a general guide; actual costs can differ based on location and current promotions.
- DIY purchase (parts only, you perform replacement): $10–$75 for the thermostat kit; no labor cost
- Local auto parts stores or online retailers (parts only, installation done by you or a shop you hire): $12–$70 for parts; labor is additional if not doing it yourself
- Independent repair shop (parts plus labor included in a typical install): total installed price commonly around $180–$320
- Dealership/GM-certified service (OEM parts with labor): total installed price commonly around $200–$360
Note: “Installed” costs assume the shop performs the thermostat replacement and may include coolant, clamps, and a basic coolant bleed. If you supply your own parts, labor costs alone will apply at the rate charged by the shop.
DIY considerations
Replacing a thermostat on a Cruze is a moderate DIY task for someone comfortable with basic automotive work. You’ll need the correct thermostat (and possibly a gasket or housing kit), coolant, and basic hand tools. Bleeding the cooling system after replacement is important to prevent air pockets. If you’re not confident, or if your model has specific bleed procedures, consider hiring a mechanic to avoid overheating or leaks.
Summary
In short, parts for a 2017 Chevy Cruze thermostat typically range from about $10 to $100 depending on aftermarket versus OEM quality and whether you buy a simple thermostat or a kit. Labor adds roughly $80 to $250 on top of the parts, with total installed costs generally between $180 and $360 depending on location and whether you go through an independent shop or dealership. To get an accurate quote, check your engine variant, confirm the correct part number, compare a few local shops, and decide whether you’ll DIY or hire a pro.
Summary: Shop around for both parts and labor, confirm compatibility with your Cruze’s engine code, and weigh DIY versus professional installation to optimize total cost.