The maintenance required light on a 2020 Toyota Tundra can be cleared quickly after the scheduled service is completed by resetting the Maintenance Minder. This process turns off the wrench icon when the system has been reset, but it does not substitute for performing the actual maintenance.
In practice, there are two widely used methods to reset the indicator. Either approach will clear the reminder once the required service is up to date. It’s important to note that resetting the light does not perform maintenance; you should complete the recommended service intervals according to Toyota’s Maintenance Minder schedule and then reset the indicator to reflect a fresh interval.
Two common reset methods
Before attempting a reset, choose the method that matches your Tundra’s interface. The following lists outline the two most common approaches used by owners and technicians.
- Reset using the odometer/trip meter button (instrument cluster reset)
- Reset using the Toyota Multi-Information Display (MID) settings
Either method achieves the same result: clearing the maintenance reminder after the appropriate service has been performed. If the light remains after a retry, consult your owner's manual or a Toyota dealership for guidance.
Method 1: Reset via the odometer/trip meter button
- Turn the ignition to ON with the engine OFF.
- Display the Trip A (or the trip information you normally use) on the instrument cluster.
- Turn the ignition OFF.
- While holding the odometer/trip reset button, turn the ignition back to ON (engine OFF) and continue holding the button until the maintenance light stops blinking or goes out.
- Release the button and start the engine to confirm the light is off.
Once completed, the Maintenance Minder counter will reset and the next service interval will be tracked from zero again. If the light does not clear after several seconds, repeat the steps once more or move to the second method below.
Method 2: Reset via the Multi-Information Display (MID)
- With the key ON and the engine OFF, access the MID by using the steering wheel controls to navigate to the Maintenance/Minder screen.
- Select the Maintenance option and then choose Reset (or Reset All, depending on the display version).
- Confirm the reset when prompted by the display.
- Turn off the ignition, then start the engine to verify the wrench/MAINT light is no longer illuminated.
Resetting through the MID is typically straightforward and can be particularly convenient on higher-trim Tundras with a more feature-rich display. If your vehicle’s interface differs slightly, consult the owner’s manual for the exact navigation path.
What to know before resetting
Important context for owners: Resetting the maintenance reminder is administrative and does not replace the actual service. Ensure that oil changes, filter replacements, tire rotations, and other scheduled maintenance have been completed or scheduled according to Toyota’s Maintenance Minder recommendations. If you’re unsure when maintenance is due, consult the service manual or a Toyota technician.
Some owners may notice differences in wording (MAINT Reqd, Maintenance Minder, or a wrench icon) depending on trim level or regional market. The underlying principle remains the same: reset only after performing the required maintenance to keep interval tracking accurate.
Summary
To remove the maintenance required light on a 2020 Toyota Tundra, you can reset the Maintenance Minder either via the odometer/trip button on the instrument cluster or through the Multi-Information Display. Each method clears the reminder after maintenance has been completed, ensuring the next service interval begins anew. Remember that resetting the light does not perform maintenance—follow Toyota’s recommended maintenance schedule and consult the owner’s manual or a dealer if you encounter any difficulties.