To remove Honda push pins, lift the center pin with a trim tool or small screwdriver to unlock the clip, then pull the pin stem straight out. Use gentle pressure to avoid breaking the trim, and be prepared that some pins are single-use and should be replaced when reinstalling. This guide covers common techniques, tools, and model differences to help you do it safely.
What push pins are and where they’re used in Honda vehicles
Honda uses plastic push rivets and clips to secure interior trim, underbody shields, and wheel well liners. The pins typically consist of a head and a stem, with a center pin that locks the two halves together. Depending on the model and location, you may encounter center-pin rivets, two-piece clips, or one-time-use expanders. Understanding the type you’re dealing with helps you remove them without damage.
Common styles you’ll encounter
The most frequent variants in Honda cars include center-pin push rivets, two-piece clips where the center pin locks a spring-loaded leg, and longer rivets used in wheel wells or undercar panels. Some styles require only lifting the center pin, while others need you to release a secondary tab or clip before the stem can come out.
Tools and safety considerations
Having the right tools and a careful technique reduces the risk of damaging trim or breaking fasteners.
- Trim removal tool (preferably plastic or nylon)
- Small flat-head screwdriver (as a backup)
- Needle-nose pliers or kicking pliers
- Replacement push rivets or clips for reassembly
- Flashlight or work light
- Work gloves to protect hands
With the proper tools, you can work more precisely and prevent scuffs, scratches, or torn upholstery. If a pin resists, avoid forcing it; re-evaluate the location for a hidden clip or a backup pin before applying leverage.
Step-by-step removal process
These steps provide a practical approach for most Honda push pins found in interior trim and underbody panels.
- Inspect the pin to determine whether there is a center pin that can be lifted or a hidden clip that must be released first.
- Insert a trim tool or the edge of a small flat-head screwdriver under the head of the pin to gain leverage without digging into the panel.
- Gently pry upward on the center pin until it protrudes enough to grab with fingers or pliers.
- If the center pin is removable, pull it straight out with fingers or pliers until the entire rivet loosens.
- Hold the trim piece steady with your other hand to prevent movement as you pull the pin stem out.
- Extract the stem straight out; avoid twisting or bending to prevent damaging the surrounding trim.
- If the pin is stubborn, check for a secondary locking tab or an additional clip and release it before continuing.
- Inspect the hole and surrounding trim for any damage. If the clip is torn or deformed, replace it with a new one.
Aftercare note: store removed pins in a small labeled container so you can match them to their holes when reassembling. If any pins show signs of wear or cracking, replace them to ensure a secure fit.
Model-specific notes for common Honda vehicles
Civic and Accord interior panels
In many Civics and Accords, interior panels use center-pin rivets or two-piece clips around the dash and door panels. The center pin often pops up easily, but some locations include recessed pockets where a thinner tool is needed to release the clip without scraping the surface. Replacing worn rivets during reassembly is recommended to maintain panel integrity.
CR-V, HR-V, and Pilot exterior trims
Exterior and wheel-well trims on SUVs like the CR-V, HR-V, and Pilot frequently use longer plastic push rivets. These can be stiffer and may require a longer trim tool or careful work from behind the panel to access the head. In some cases, you may need to remove adjacent panels to gain better access to the pin head and reduce the risk of breaking the surrounding trim.
Aftercare and replacement parts
Not all pins are created equal, and some are intended for single-use. If a pin or clip shows any cracks or deformity after removal, replace it with a new one to ensure a secure fit. Reassemble by aligning the panel correctly, inserting the pin straight, and pressing the center pin back in until it seats securely.
For a long-lasting result, keep a small supply of common Honda push rivets and clips. If you’re unsure about the exact part number, consult your vehicle’s service manual or ask a dealership parts counter for the correct replacement type and size for your model and year.
Summary
Removing Honda push pins involves locating the center pin, prying it up with a trim tool, and pulling the stem straight out while supporting the panel. Use the right tools, proceed gently, and be prepared for one-time-use clips that must be replaced. Model variations exist across Civic, Accord, CR-V, HR-V, and Pilot, so if a pin won’t budge, look for hidden clips or consult the service manual. With careful handling, you can remove and reinstall pins without damage and keep your Honda’s interior looking pristine.
How to remove push pin back?
And small hammer. First line up the pusher tool with the pin. And turn the thread until it pushes the pin far enough to be pulled. Out. Make sure that you're pushing in the direction of the arrow.
How to remove Honda plastic rivets?
You need to first reset the clip by pushing the post. Up. So that it sticks out from the head of the clip insert the clip into the hole. And press the post.
How to get push pins out without a tool?
Let me show you how easy it is right so just use your screwdriver. You want to be very careful. Here just pry up. And you'll hear it kind of click.
How to take out push pin on car?
In and wiggle it. Free. However you got to be careful with the screwdriver cuz it puts a lot of pressure in one spot and you risk breaking this. So you pull it up.