The quick answer: use the right-side wiper stalk on the steering column to set Intermittent, Low, or High wipe speeds (and Auto if equipped), and pull toward you to spray windshield washer fluid when needed.
About the wiper controls in Honda City
Most Honda City models share a common control layout on the right stalk, though features can vary by year, market, and trim. Basic options typically include Off, Intermittent (INT), Low (LO), High (HI), and, on some models, Auto or rain-sensing mode where the system adjusts speed automatically based on rainfall.
Manual operation: turning on the wipers
Use these steps to operate the wipers manually and select the appropriate speed. If your model has Auto mode, you can switch to AUTO to let the system adjust automatically based on rainfall.
- Locate the wiper stalk on the right side of the steering column.
- Set the switch or end dial to INT for intermittent wiping, then adjust the interval if your model provides a control for it.
- Move the stalk to LO for low-speed continuous wiping.
- Move the stalk to HI for high-speed continuous wiping.
- Return the stalk to OFF when the wipers are not needed.
- If available, set to AUTO to enable rain-sensing operation, which adjusts speed automatically.
Note: The exact labels and controls can vary; in some markets, Auto is the only setting that engages automatic speed, while in others INT, LO, and HI are clearly labeled on the stalk.
Washer spray and wiping: using the washer function
To wash and wipe, use the washer control integrated into the wiper stalk. In most City variants, a short pull toward you sprays washer fluid and activates the wipers for a wipe cycle. Release to return to the prior speed. Some trims may require a light press on the stalk end or a separate button for the washer, depending on the market and generation.
- Briefly pull the wiper stalk toward you to spray washer fluid; the wipers will perform a couple of sweeps automatically.
- Release to return to the previous speed; if you were in INT, the wipers may resume at the chosen interval after the wash.
- For a single wipe after spraying, perform a quick pull and release—the exact behavior depends on your model.
Always refer to your owner's manual for the exact action for your specific City year and trim, especially if you have a newer model with rain-sensing wipers.
Safety and maintenance tips
Keep windscreen wiper blades in good condition; replace worn blades to avoid streaking. Maintain the washer fluid reservoir with the appropriate windshield washer fluid. If wipers fail to operate, check fuses and the wiper motor, or consult a service professional.
Summary
In a Honda City, you operate the wipers with the right-side stalk: choose INT, LO, or HI for manual speeds, or AUTO if equipped for automatic operation. Use a pull of the stalk toward you to spray windshield washer fluid and trigger a wipe. Variations exist by year and market, so consult your manual for precise controls. Regular blade maintenance helps ensure clear visibility in all conditions.