To replace the front wiper blades on a 2013 Hyundai Accent, remove the old blades from the wiper arms and install new 26-inch driver-side and 16-inch passenger-side blades, then return the arms to the windshield.
This guide walks you through the full process, including blade sizes, removal steps, installation steps, safety tips, and maintenance notes. The 2013 Accent uses standard hook-style front wiper blades: 26" on the driver's side and 16" on the passenger side. If you own the hatchback variant, you may also need to replace the rear wiper blade, which uses a different attachment and size. Always verify blade compatibility with your trim and climate conditions.
Know your blades: sizes and tools
Before you start, confirm the correct blade sizes for the 2013 Accent and gather any basic tools you might need.
- Driver-side wiper blade: 26 inches
- Passenger-side wiper blade: 16 inches
- Rear wiper blade (if your model has a rear wiper): about 11–12 inches
- Replacement blades compatible with 2013 Hyundai Accent (check packaging or the manual)
- Optional tools: microfiber cloth, isopropyl alcohol wipe, and a small flat-head screwdriver for stubborn adapters
Having the right blades and minimal tools on hand helps speed up the replacement and reduces the risk of damaging the arms or glass.
Removing the old wiper blades
Follow these steps to safely remove the current blades without scratching the windshield or bending the arms.
- Turn off the ignition and set the wipers to the park position so the blades rest away from the top edge of the windshield.
- Gently lift the wiper arm away from the glass until it is at roughly a 90-degree angle to the windshield; support the arm with one hand to prevent it snapping back.
- Locate the release mechanism on the blade’s connector to the wiper arm (this is usually a small tab, button, or lever).
- Depress the release tab and slide the blade away from the arm to disengage it. For J-hook arms, you may need to rotate the blade slightly and pull straight out of the hook.
- Remove the blade and set it aside, ensuring the wiper arm rests on the hood or glass to avoid damage.
Proper removal reduces the risk of damaging the blade adapters or the blade housing on the arm.
Installing the new blades
Attach the new blades in the reverse order, ensuring a secure fit and correct orientation for each arm.
- Identify which blade goes on the driver side (26 inches) and which goes on the passenger side (16 inches).
- With the blade oriented correctly, attach the blade’s connector to the wiper arm until you hear or feel a click, indicating it is locked. If you have a J-hook arm, slide the blade into the hook and then press until it’s secure.
- Gently lower the wiper arm back onto the windshield so the blade sits flat against the glass.
- Repeat for the other blade if you haven’t already replaced both sides.
- Test the wipers by turning the ignition on and running a few sweep cycles to verify smooth operation and even contact with the windshield. If you notice skipping or streaks, remove and recheck fit or consider a different blade style.
Once installed, keep the blades clean and avoid using the wipers to remove heavy ice or debris; clear ice with an ice scraper to extend blade life.
Rear wiper (hatchback models)
On hatchback variants, the rear wiper blade is a separate task with its own size and attachment method. If your Accent has a rear wiper, consult the blade packaging or the owner’s manual for the exact replacement procedure and size (typically around 11–12 inches).
Note: This section covers the front wipers only; the rear wiper replacement steps differ by blade type and mounting method.
Maintenance and care tips
To maximize blade life and visibility, follow these tips when replacing and maintaining wiper blades.
- Replace blades in pairs to ensure balanced performance and prevent uneven wear.
- Plan to replace wiper blades roughly every 12–18 months, or sooner if you notice streaking, skipping, or chattering.
- Keep the rubber edge clean; wipe with a microfiber cloth and alcohol to remove residue from the blade and the wiper arm tip.
- In winter, consider winter blades designed for colder conditions and avoid using blades to remove heavy ice; de-ice the windshield first.
Summary
Changing the wiper blades on a 2013 Hyundai Accent is a straightforward task you can do at home in under 30 minutes. Identify the correct sizes (26" driver, 16" passenger, with optional rear blade for hatchbacks), remove the old blades by releasing the connector, install the new ones until they click, and test the sweep to ensure clear visibility. Regular maintenance and timely replacement keep your visibility high and your blades lasting longer.
What size windshield wipers does a 2013 Hyundai Accent take?
2013 Hyundai Accent Wiper Blades Size/Price Chart
| Car | Driver | Pass. |
|---|---|---|
| 2013 Hyundai Accent | 26 in. | 16 in. |
Ask about result
Can I remove wiper arms without a special tool?
I often remove wiper arms using a wrench, when I haven't got any locking pliers around.
Ask about result
How to remove Hyundai Accent rear wiper blade?
And pop it off all right now to install. It. We're going to feed it in. And then when it clicks. In it's good and then you put it down.
How to change wiper blades on a 2013 Hyundai Accent?
While pushing the lock pull down on the wiper. Blade then remove it from the arm. To place new blades on the arm. Fit the new blade on the arm. And pull it up into the fitting.