Front wiper blades are 26 inches on the driver side and 18 inches on the passenger side; the rear blade is 12 inches. Replacing them is a quick task you can do yourself with basic blades and a few minutes.
This guide details how to identify the correct sizes, gather replacement blades, and perform the front and rear wiper blade changes on the 2020 Hyundai Santa Fe. It covers typical blade adapters and safety tips to ensure a secure, clean wipe in wet conditions.
What you’ll need
Before you begin, assemble the blades that fit your Santa Fe and any adapters included with them. Having these items ready helps the process go smoothly.
- Front wiper blades: 26" (driver) and 18" (passenger)
- Rear wiper blade: 12"
- Replacement blades with the correct adapters for Hyundai (many brands include multiple adapter types)
- Clean cloth or microfiber rag for wiping the blade and arm tips
With the right blades and adapters, you’ll ensure a secure fit and a streak-free wipe across the windshield and rear window.
Front wipers: Step-by-step replacement
Follow these steps to replace the two front blades on the Santa Fe 2020. The process is similar for each side, with blade length differing by side.
- Park the vehicle on a level surface, turn the ignition off, and set the wipers to rest. Gently lift the driver-side wiper away from the windshield to expose the blade and connector.
- Check the connector type on the old blade (most are a standard J-hook or pin-type). Some blades have a release tab; locate the tab or locking mechanism.
- Carefully remove the old blade by pressing the release tab or sliding the blade out of the wiper arm’s connector. Keep hold of the blade so it doesn’t snap back onto the windshield.
- Prepare the new blade by selecting the correct adapter (if your replacement kit includes multiple adapters). Attach the adapter to the new blade as directed by the manufacturer.
- Attach the new blade to the wiper arm with a firm click or slide it into place until you hear/feel a secure lock. Ensure the blade is properly seated in the arm’s connector.
- Gently lower the wiper arm back onto the windshield and repeat the process for the passenger-side blade (18").
- Test the new blades: turn on the ignition and run the wipers a few times to confirm a smooth, full sweep with no streaks.
After completing the front blades, inspect both ends of the arms to ensure there’s no misalignment and that the blades rest evenly on the glass.
Rear wiper: Step-by-step replacement
The rear wiper on the Santa Fe 2020 is a smaller, simpler replacement. Follow these steps to swap the 12" blade.
- Open the rear hatch to access the wiper blade assembly. If necessary, tilt or remove the cover to reach the blade connector.
- Turn the blade holder slightly to release the old blade from the connector. Some designs require pressing a small tab or lifting a lock.
- Remove the old blade from the arm and dispose of it properly.
- Attach the new rear blade to the wiper arm using the correct adapter, ensuring it is securely seated.
Close the hatch, lower the blade away from the glass, and test the rear wiper by operating it at low and high speeds to confirm a clean wipe.
Tips for a reliable install and best results
To ensure long-lasting performance and avoid streaks, consider these tips during and after installation.
Use blades rated for your climate and vehicle, verify the adapter fit before mounting, and replace blades in pairs when possible to maintain even wiping performance. Regularly wipe the blades with a clean cloth to remove dirt and road grime.
Finding the right sizes and adapters
If you’re unsure about blade sizes, check the owner’s manual or refer to the blade packaging which usually lists compatible vehicles. For the Santa Fe, the standard sizes are commonly listed as 26" (driver), 18" (passenger), and 12" (rear). When buying aftermarket blades, choose a kit that includes adapters compatible with Hyundai vehicles or select a brand that explicitly states fitment for Hyundai Santa Fe 2020.
Summary
Changing wiper blades on a 2020 Hyundai Santa Fe is a straightforward DIY task. Start with the front blades—26" on the driver's side and 18" on the passenger side—followed by the rear 12" blade. Gather the correct blades and adapters, detach the old blades with the release mechanism, attach the new blades securely, and test the system to ensure a clear, streak-free wipe. Regular checks and proper installation help maintain visibility in all weather.
How to lift wipers on a 2020 Hyundai Santa Fe?
Turn your engine off. Within 20 seconds of shutting the engine off, lift and hold the wiper lever up to the MIST position for about 2 seconds. The wipers will move to the top wipe position (service position).
How do you change windshield wipers on a 2020 Hyundai Santa Fe?
Position. But most newer Hyundai models require you to press the lever down for the mist. Position determine the correct position for your model. Next turn off your vehicle.
How to put 2020 Santa Fe wipers in service mode?
And get them into service mode.
What windshield wipers do I need for a 2020 Hyundai Santa Fe?
26"+16" Windshield Wipers With 11" Rear Wiper Blade Sets Automotive Replacement for Hyundai Santa Fe 2019-2023,Easy For Installation (Pack of 3)