How to change the wiper blades on a 2018 Nissan Sentra?

Replacing the front wiper blades on a 2018 Sentra is a quick, do-it-yourself task. The typical setup uses a 26-inch blade on the driver’s side and a 17-inch blade on the passenger side; you’ll remove the old blades from the arms and snap on new ones, then test the system to ensure proper contact with the windshield.

What you’ll need

Before you start, confirm the blade sizes for the front wipers on your Sentra. The front blades are usually 26 inches (driver) and 17 inches (passenger). Gather two replacement blades in those sizes, plus a clean rag. Some drivers also keep a small flat-head screwdriver handy in case you need to release a stubborn adapter, though most modern blades snap on and off by hand.

• Two replacement wiper blades: 26-inch driver-side and 17-inch passenger-side


• Optional: Small flat-head screwdriver or blade-release tool (for stubborn adapters)


• Clean rag or microfiber cloth to wipe the blade and windshield


• Optional: rain repellent or washer fluid after replacement

With the blades and tools ready, you can begin the replacement process.

Step-by-step replacement

Follow these steps in order to safely remove the old blades and install new ones. The 2018 Sentra front wipers use a standard hook-style attachment on the arms; you’ll release the blade adapter and snap on the new blades until they click into place.

1. Park the car on a level surface and turn off the engine. If your climate requires, also ensure the wipers are in the parked position.


2. Gently lift the driver's side wiper arm away from the windshield until it holds in a raised position.


3. Find the release mechanism on the blade’s adapter. For most 2018 Sentra blades, press the small tab or button and slide the blade down and off the arm. If you have a pinless or bayonet adapter, align the blade and release tab accordingly to detach.


4. Compare the new blade’s connector to the old one to ensure compatibility. Most Sentra blades use a J-hook or standard hook connection.


5. Attach the new blade to the driver-side arm by sliding it onto the hook until you hear a click. Make sure the blade is seated firmly and lies flat against the arm. Do not force or twist it.


6. Repeat the same detachment and attachment process for the passenger-side blade (the 17-inch blade).


7. Gently lower the wiper arms back onto the windshield. Avoid letting them snap back, which can crack the glass; you can guide them down with a fingertip while holding the arm.


8. Test the new blades. Turn on the ignition and run the wipers to check for smooth operation. If you used washer fluid, spray to confirm wipes cleanly and that there’s no streaking or skipping.

If you encounter streaks or skipping, check that the blades are properly seated and replace them again if the adapters aren’t fully engaged. Sometimes, a slight lift and reseating can fix alignment.

Rear wiper consideration

The 2018 Nissan Sentra sedan typically does not have a rear wiper. If you own a hatchback variant, the rear wiper replacement procedure is different and may require the blade specific to that model year. Check the owner’s manual or the blade packaging for the correct rear blade size and method.

Tips and common questions

• Best practice is to replace blades every 12 to 24 months, depending on climate and usage.


• Always choose blades that are designed for your vehicle’s make and model to ensure proper fit and blade curvature.


• Never spray water over a dry blade to test; do so while the wipers are in motion to observe proper contact and streaking.

Summary

Replacing the wiper blades on a 2018 Nissan Sentra is a quick, DIY-friendly maintenance task. Confirm front blade sizes (26 inches on the driver’s side, 17 inches on the passenger side), release the blade adapters to remove the old blades, snap on the new blades until they click, and test for smooth operation. With proper blades and secure installation, you’ll maintain clear visibility through rain and spray.

How to take windshield wipers off a Nissan Sentra?

Up you know these are outside in the weather. And the rain. And they can get stuck. So that comes out and that mechanism looks like this uh it just it's a little a little uh button there and that.

How to put Nissan Sentra wipers in service mode?

So I'm going to turn the ignition. Off hit the wiper. It's actually two times so I'm sorry. So you hit this up twice. And they stay in upright position.

Will AutoZone install wiper blades for free?

AutoZone does offer wiper blade installation as one of its customer services, alongside other complimentary offerings like free battery testing, charging and installation, engine light diagnostics, and loaner tools.
Ask More

What windshield wipers do I need on my 2018 Nissan Sentra?

2018 Nissan Sentra Wiper Blades Size/Price Chart