How to change Honda Clarity windshield wipers?

Replacing the windshield wipers on a Honda Clarity is a straightforward DIY task. In most cases you’ll swap out the front blades first and, if your model includes a rear wiper, replace that blade as well. The front blades are typically sized for the driver and passenger sides, while a rear blade (if equipped) is smaller. Always verify exact sizes on the packaging or in the owner’s manual for your specific year and trim.

What you’ll need

Before you begin, gather the replacement blades that match your Clarity’s front and rear windshields, along with a couple of basic items. Knowing the correct blade sizes for your year and trim helps prevent fit issues and streaking on the glass.

Blade types and sizing

Honda Clarity front blades are commonly beam-style for clean, streak-free performance. The driver’s side blade is typically around 26 inches and the passenger’s side around 18 inches, though exact lengths can vary by year and trim. The rear blade, if your model has one, is usually smaller (often in the 9–12 inch range). Always confirm sizes on the packaging or in the owner’s manual for your specific vehicle.

• Replacement windshield wiper blades (front: two blades in the correct sizes; rear: one blade if equipped).


• Clean cloth for wiping the wiper arms and mounting area.


• Optional blade removal tool or a small flat-head screwdriver if your blades use a locking adapter.


• Ongoing maintenance items (optional): rain-repellent treatment and a quick wipe-down of the windshield.

Having the right blades ensures proper contact with the glass and a smooth sweep across the entire windshield.

Front windshield wipers: Step-by-step

The following steps cover the front wiper replacement process for the Honda Clarity. The procedure is similar across most model years and trims, with minor differences in blade connectors.

1. Park the vehicle, turn off the ignition, and gently lift the driver’s and passenger’s wiper arms away from the windshield until they stay upright.


2. Locate the release mechanism on the blade adapter where it attaches to the wiper arm. Depending on the blade type, you may need to press a small tab or rotate a locking piece to release.


3. Carefully slide the old blade out of the wiper arm’s hook/adapter. Keep a firm grip so the arm doesn’t snap back toward the glass.


4. Attach the new blade by aligning it with the wiper arm’s connector and pushing until you hear a click or until it sits firmly in place.


5. Lower the wiper arm back onto the windshield and repeat the process on the other front side if needed.


6. Test the wipers by turning on the ignition and running a brief sweep to verify full contact and clean performance.

If you notice streaks or incomplete coverage, re-seat the blade, verify you have the correct size, or consider trying a higher-quality blade. Ensure the arm rests flat on the glass during testing.

Rear windshield wiper: If equipped

Some Honda Clarity variants include a rear window wiper. If yours has one, the replacement steps are similar but the blade and attachment differ. Proceed only if your model shows a rear wiper on the glass, and always verify size before purchase.

1. With the ignition off, lift the rear wiper arm away from the rear window until it stays extended.


2. Release the blade from its adapter by pressing the release tab or rotating the attachment as required by the blade type.


3. Remove the old blade and dispose of it properly.


4. Attach the new blade to the rear wiper arm until it clicks into place, then lower the arm back against the glass.


5. Test the rear wiper to ensure a clean sweep and full coverage across the window.

Not all Clarity trims have a rear wiper. If you’re unsure, consult the owner’s manual or contact a Honda parts retailer to confirm the correct rear blade size for your vehicle.

Maintenance tips and common issues

These tips help ensure long blade life and reliable performance between replacements.

• Use blades that match your wiper arm style (beam vs. frame) and the vehicle’s size requirements. Check packaging or Honda’s parts catalog for compatibility.


• Do not let the wiper arms snap back onto the windshield. Lower them slowly to avoid damage to the glass or blades.


• Inspect blades for cracks, splits, or streaking, and replace them promptly if performance declines.

Keeping the blades clean and replacing them promptly after wear or winter exposure helps maintain visibility in poor weather and prolongs blade life.

Summary

Changing the Honda Clarity’s windshield wipers is a quick, practical maintenance task anyone can perform at home. Start by confirming the correct sizes for your year and trim, gather the appropriate replacement blades, and follow the steps to detach the old blades and install the new ones. After installation, test the sweep, check for streaks, and replace blades as needed to maintain clear visibility in all driving conditions.

What size windshield wipers for Honda Clarity?

26 inch
For 2017‑2021 Honda Clarity Windshield Wiper Blades 2 Pack Michelin Stealth Ultra 26 inch Size.
Ask More

How to unclip wiper blades?

But First you need to remove the protective. Cover just slide a plastic tool under the cover and push it upward to unsnap. Then slide it toward the wiper blade tip to unhook and remove it from the

Can I remove wiper arms without a special tool?

I often remove wiper arms using a wrench, when I haven't got any locking pliers around.
Ask More

How to change the wiper blades on a Honda?

1. Raise the wiper arm off. Pivot up the bottom end of the wiper blade until it comes off from the wiper arm.
2. Slide the wiper blade out from the end with the indent.
3. Remove the retainers from wiper blade and mount to a new rubber blade.
4. Slide the new wiper blade onto the holder.