The Fram oil filter numbers that most commonly fit a 2011 Buick LaCrosse are PH7317 and its higher-performance counterpart XG7317. Always verify the exact part against your engine variant and VIN.
To understand why this matters, the 2011 Buick LaCrosse typically uses a mid-size V6 engine, and oil filter compatibility depends on the specific engine code used in your car. Fram offers a couple of filters that cover the common LaCrosse configurations, but variations can occur between engines and trims. This article breaks down the likely Fram options and how to confirm the right one for your vehicle.
Fram filter options for the 3.6L V6 LaCrosse
Below are the Fram filters that most often cross-fit the 3.6L V6 found in the 2011 LaCrosse. Use this as a starting point, then double-check with a retailer or Fram’s catalog using your vehicle details.
- PH7317 — Fram Extra Guard (standard filtration; widely used for 3.5–3.8L GM V6 engines).
- XG7317 — Fram Extended Guard (higher filtration capacity; a common upgrade option).
These two part numbers cover the typical 3.6L GM V6 configurations in the 2011 LaCrosse. If your vehicle uses a different engine variant or a regional specification, the exact filter may differ slightly, so verify before purchasing.
Notes on compatibility and alternatives
Not all 2011 Lacrosse trims use the exact same engine, and some markets may have variations. If your LaCrosse uses a different engine code or you’re swapping from a closely related GM model, consult Fram’s official fit guide or a trusted parts retailer to confirm the correct part number for your VIN.
How to confirm the exact Fram part number for your car
To avoid buying the wrong filter, use these verification steps before purchasing:
- Identify your engine code (for example, GM 3.6L V6 variants such as LLT/LFX family) and verify it in the owner's manual or under-hood label.
- Cross-check Fram PH7317 or XG7317 in Fram’s official catalog or a reputable parts retailer by entering the vehicle year, make, model, and engine.
- Check the vehicle’s VIN with the parts retailer’s fit tool to ensure the filter matches your exact build.
- Compare the physical size and thread configuration of the current filter (if available) to ensure the new filter will install correctly.
In short, the PH7317 and XG7317 are the primary Fram options for a 2011 Buick LaCrosse with the common 3.6L V6. Double-check with a reliable parts source using your VIN and engine code to confirm.
Summary
For the 2011 Buick LaCrosse, Fram PH7317 is the standard-fit option, with XG7317 offering higher filtration capacity. Always verify the exact part using your engine code and VIN, as small variations can affect compatibility. When in doubt, consult Fram’s fit guide or a trusted auto parts retailer to confirm the correct oil filter for your specific vehicle configuration.
What is the oil filter number for a 2011 Buick Lucerne FRAM?
FRAM Engine Oil Filter Fits: 2009-2011 Buick Lucerne FRAM, PH9837, Oil Filter.
What does a PH4386 oil filter fit?
SKU 0175513
| This Part Fits | |
|---|---|
| Suzuki Vitara | 1999, 2000, 2001, 2002, 2003 |
| Toyota Camry | 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| Toyota Celica | 1990, 1991, 1992, 1993, 2000, 2001 |
| Toyota Corolla | 1988, 1989, 1990, 1991, 2009, 2010, 2011, 2012, 2013 |
What kind of oil does a Buick LaCrosse 2011 take?
Oil Grade: SEOC3
| Viscosity: | 5W-30 (All TEMPS) |
|---|---|
| Capacity: | 5.5 quarts (with filter). After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |
| Notes: | (1) This specification has been updated from Dexos 1 Gen 2 to GM Dexos 1 Gen 3. |
What is the oil filter number for a 2012 Buick LaCrosse FRAM?
For 2010-2016 Buick LaCrosse Oil Filter Fram 28113TG 2011 2012 2013 2014 2015. Features: Original Equipment Replacement. FRAM Extra Guard Oil Filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals.