The Honda HR-V’s transmission fluid capacity varies by model year and the type of transmission, but most CVT-equipped HR-Vs require about 7.5 quarts (roughly 7.1 liters) for a full fill. A simple drain-and-fill from the pan typically uses around 4.5 quarts (about 4.3 liters). Always verify with your owner’s manual or Honda service data for your exact year and transmission type.
What affects the transmission fluid capacity
The total amount of fluid an HR-V needs depends on several factors, including the year of manufacture, regional specifications, and whether you’re performing a complete system refill or a more limited drain-and-fill. Honda CVTs use specific fluid grades (commonly HCF-2) and have service requirements that can differ slightly between generations.
Model year and transmission type
HR-Vs in most markets use a continuously variable transmission (CVT). The capacity figures described here reflect typical CVT configurations across common HR-V generations and may vary by year and region.
Typical capacity figures by service type
- Full transmission fluid change (pan drain, filter if applicable, and system refill including the torque converter and cooler lines): about 7.4–7.8 quarts (7.0–7.4 liters).
- Drain-and-fill from the pan only (no full system flush): typically around 4.5 quarts (4.3 liters).
These values are approximate and can vary slightly by model year, market, and whether the transmission requires a filter replacement or additional servicing. For precise figures, consult the owner’s manual or Honda service data for your specific HR-V VIN.
Practical guidance for servicing
When planning a transmission fluid service, consider whether you’re performing a simple drain-and-fill or a full system change. Use the correct Honda CVT fluid (often Honda HCF-2) and follow the manufacturer’s specifications for capacity and procedure. Overfilling can cause foaming and pressure issues, while underfilling can lead to inadequate lubrication and transmission wear.
Summary
In general, you should expect around 7.5 quarts (about 7.1 liters) of CVT fluid for a complete HR-V transmission fluid change, with roughly 4.5 quarts (about 4.3 liters) needed for a pan drain-and-fill. Always confirm the exact capacity for your model year and region, and refer to the owner’s manual or a Honda service bulletin for the precise procedure and fluid specification.