Replacing the starter on a 2010 Honda Civic typically costs about $300 to $650, depending on the part you choose and the labor rate at the shop. Dealers usually price higher than independent repair shops, while opting for a rebuilt or remanufactured unit can trim costs. You can save further by shopping around or supplying your own part to a shop that accepts parts from customers.
This article explains what drives that price, outlines typical cost ranges for different part options, and offers guidance on choosing a shop. It reflects common pricing seen in the United States as of 2025–2026 and may vary by location and vehicle condition.
What influences the cost
Prices are driven by the type of starter you install, the labor required, and where you have the work done. Below is a practical breakdown to help budget for a replacement.
- Starter unit price by type:
- New OEM starter: roughly $180–$350
- Aftermarket new starter: roughly $120–$260
- Remanufactured/rebuilt starter: roughly $80–$180
- Labor costs:
- Typical time: about 1 to 2 hours
- Labor rate: roughly $75–$125 per hour
- Total labor range: about $75–$250
- Shop type and location:
- Independent repair shop vs dealership—dealerships tend to charge higher labor rates
- Geographic variation can affect both parts and labor prices
- Additional costs and potential surprises:
- Tax, shop supplies, and disposal fees
- Diagnostic charges if no other issue is found
- Possible extra work if bolts are corroded or if the flywheel/ring gear needs attention
Concluding note: The total price you see will depend on which starter you choose, where you have the work done, and whether any special circumstances arise during installation. In most cases, expect a combined range that centers around a few hundred dollars, with dealer-installed OEM parts pushing toward the higher end.
Typical total price ranges by option
To help you plan, consider how your part choice and shop selection shape the final number. The figures below illustrate common scenarios you’ll encounter when pricing a starter replacement for a 2010 Civic.
- Independent shop with remanufactured or aftermarket starter: roughly $250–$450
- Independent shop with OEM/new starter: roughly $350–$600
- Dealership with OEM/new starter: roughly $500–$800
- Discounts or customer-supplied part (where permitted by the shop): potential savings of up to 10–30% off standard parts pricing
These ranges reflect typical practices in the U.S. market and can vary based on local labor rates, the exact Civic trim, and whether any related components require replacement during the job. Always request a written, itemized estimate before authorizing work.
What to watch for when shopping
Getting the best value means comparing more than just the bottom line. Consider the following as you vet repair shops and quotes.
Look for a clear breakdown of parts and labor, confirm whether the starter is new OEM, aftermarket, or remanufactured, and ask about warranty terms on both parts and workmanship. If you supply your own part, verify the shop’s policy on customer-provided parts and whether it affects the warranty.
Summary
For a 2010 Honda Civic, a starter replacement commonly lands in the $300–$650 range, with OEM-new installations at the higher end and remanufactured or aftermarket parts offering savings. Labor typically accounts for 1–2 hours at $75–$125 per hour. Dealer repairs cost more, while independent shops provide more pricing flexibility. Get multiple written bids, know your part choice, and ensure warranty coverage is clear to avoid surprises.