In a 2010 Sentra, oil capacity depends on the engine: the 2.0-liter MR20DE requires about 4.7 quarts (including a new filter), while the 2.5-liter QR25DE uses about 5.6 quarts (including a filter).
Engine options and their oil capacity
The 2010 Sentra came with two gasoline engines, and each engine has a different oil capacity. Knowing which engine is installed helps you measure the correct amount when performing an oil change.
- 2.0L MR20DE engine: about 4.7 quarts (4.4 liters) of engine oil, including the new filter
- 2.5L QR25DE engine: about 5.6 quarts (5.3 liters) of engine oil, including the new filter
These figures assume a full oil change with a fresh filter. If you’re topping up without changing the filter, consult the dipstick and add gradually to avoid overfilling.
Additional considerations
Always use the viscosity recommended in your owner's manual, and consider climate and driving conditions when selecting an oil grade. After changing the oil and starting the engine, recheck the level with the dipstick to ensure it sits within the correct range.
Summary
For a 2010 Nissan Sentra, the oil capacity is engine-dependent: about 4.7 quarts for the 2.0L MR20DE and about 5.6 quarts for the 2.5L QR25DE, including the new filter. Verify the exact figure in your manual or by checking the engine model and VIN if you’re unsure.