The RAM 1500 with a 5.7 L HEMI typically uses about 7 quarts (6.6 liters) of engine oil when you replace the oil filter during an oil change; about 6 quarts (5.7 liters) if the filter is not replaced. Always verify the exact capacity for your year and configuration in the owner's manual or on the under-hood sticker.
The 5.7 L HEMI is used across several RAM 1500 trims and production years, and oil capacity can vary slightly due to engine calibrations, oil cooler configurations, or aftermarket parts. This article provides the standard figures and practical guidance to help you plan an oil change accurately.
Oil capacity specifics
Below is a concise breakdown of the typical capacity figures you’ll encounter for a 5.7 HEMI RAM 1500, reflecting whether you change the oil filter.
- With oil filter change: 7 quarts (6.6 liters)
- Without replacing the filter: about 6 quarts (5.7 liters)
Note: Some model years or regional specifications may vary slightly. Always confirm the exact capacity for your vehicle from the owner's manual or the vehicle’s service information.
Oil grade and maintenance notes
For most RAM 1500 5.7 HEMI applications, the recommended oil is a synthetic 5W-20, with 5W-30 acceptable in certain climates or years. Always follow the exact specification printed in your manual or on the engine oil fill cap. Use a new OEM oil filter at each change and adhere to the manufacturer’s recommended change interval, typically around 5,000–7,500 miles when using synthetic oil, or shorter intervals if using conventional oil, depending on driving conditions.
Summary
In summary, the 5.7 HEMI RAM 1500 generally takes about 7 quarts (6.6 liters) of engine oil when performing a standard oil change with a new filter. If the filter isn’t changed, the total required roughly drops to 6 quarts (5.7 liters). Always verify the exact capacity for your model year and configuration and follow the recommended oil grade and change interval from the manual.