Commonly, a Ford Fusion with a 2.5-liter four-cylinder holds about 4.5 quarts of oil with a filter. A 2.0-liter EcoBoost four-cylinder takes about 5 quarts. Exact capacity depends on the exact engine variant and model year, so always verify with the owner's manual or the under-hood oil specification sticker.
Oil capacity by Fusion 4-cylinder engine
Below are the typical capacities for the main 4-cylinder engines Ford used in the Fusion. Use the exact figure from your owner's manual for maintenance intervals and oil type.
- 2.5L Duratec I4 (non-turbo) – Approximately 4.5 quarts (4.3 L) with filter.
- 2.0L EcoBoost I4 (turbocharged) – Approximately 5.0 quarts (4.7 L) with filter.
Note: The exact capacity can vary by model year and whether you're replacing the oil filter. If you're working with a hybrid or another variant, the figure could differ slightly. Always consult your owner's manual or Ford's official documentation for your specific vehicle and VIN, and factor in any additional oil for a new filter if applicable.
Additional context and tips
When performing an oil change, use the recommended viscosity and follow the service interval outlined by Ford. After draining, install a new filter and pour in the required amount, then check the level with the dipstick to ensure it’s within the proper range before running the engine. If you’re unsure about your exact engine configuration, contact a Ford dealer or reference the vehicle identification number (VIN) to confirm the correct specification.
Summary
The amount of oil a 4-cylinder Ford Fusion takes varies by engine: about 4.5 quarts for the 2.5L engine and about 5 quarts for the 2.0L EcoBoost. Confirm the precise capacity for your year and engine variant in the owner's manual or via Ford’s official resources to ensure an accurate fill.