The 2025 GMC Canyon equipped with the 2.7L turbocharged engine typically requires about 6 quarts (roughly 5.7 liters) of engine oil for a standard change with a new filter. Always confirm the exact figure in your owner's manual, as capacity can vary slightly by trim, year, or service procedure.
The specifics of the specification
GM's official guidance for the 2.7L Turbo in the 2025 Canyon lists an engine oil capacity of 6 quarts (5.7 L) when performing a normal oil change with a new filter. This figure refers to the total oil required to fill the engine after draining all oil, including the new filter. For individual vehicles, minor variations can occur depending on filter size and manufacturing tolerances, so it’s best to verify with the exact vehicle manual or a dealer service bulletin.
Recommended oil type and maintenance notes
GM generally specifies Dexos1 Gen 2 synthetic engine oil for this engine. The typical viscosity recommended is 5W-30, though climate and regional guidelines may adjust the exact grade. Always use the correct filter when changing the oil and ensure the oil level is checked with the engine off and on a level surface after a brief idle.
Practical implications for owners
When planning an oil change, budget for about 6 quarts of oil plus a new filter. If you’re coordinating a dealer service, they will usually supply the exact quantity and filter required for your specific vehicle configuration. Keeping a note of your VIN can help ensure you use the precise GM-recommended specification.
Summary
The 2025 GMC Canyon with the 2.7L Turbo generally takes about 6 quarts (5.7 liters) of engine oil for a standard oil change with a new filter, using Dexos1 Gen 2 synthetic oil (commonly 5W-30). Always verify the exact capacity and viscosity in your vehicle’s owner's manual and consult a dealer or qualified mechanic if you’re unsure.