The front driver-side blade is typically 26 inches, the front passenger-side blade is 18 inches, and the rear wiper is about 11 inches. These sizes are standard for many 2019 CR-V models, but some markets or trims may differ. Always confirm with your owner's manual or by measuring the blades on your exact vehicle.
In this article, we outline the official and commonly recommended wiper sizes for the 2019 Honda CR-V, explain how to identify the correct sizes for your specific vehicle, and provide practical tips for replacing and installing new blades correctly.
Front wiper blade sizes
The following sizes cover the two front blades for the 2019 CR-V. Use this as a quick guide when shopping for two new blades or when replacing one side at a time.
- Driver side blade: 26 inches
- Passenger side blade: 18 inches
Using the correct front blade sizes ensures proper coverage, reduces streaking, and improves visibility in rain or snow.
Rear wiper blade size
The 2019 Honda CR-V typically uses a single rear wiper blade on the liftgate. The usual length is 11 inches, though regional variations can occur.
- Rear blade: 11 inches
Verify the exact rear blade size for your vehicle model and market to ensure a proper fit, especially if you own a version destined for a different country or region.
How to verify and replace
To confirm the correct sizes, check the owner's manual, inspect the blade itself for length markings, or measure from the blade’s center to its tip. Replacing wipers typically involves releasing the blade from its wiper arm and snapping on a new blade with the correct connector type. For most modern Hondas, you’ll encounter a simple hook or pin connector with a straightforward release mechanism.
Important notes
Wiper blade sizing can vary slightly by trim level or regional specification. If you order blades online, double-check compatibility using a VIN-based lookup or consult the retailer’s compatibility tool. When in doubt, contact a Honda dealership or a qualified auto parts supplier for confirmation.
Summary
For a 2019 Honda CR-V, plan for front blades of 26 inches (driver) and 18 inches (passenger), plus a rear blade of 11 inches. Always verify the exact sizes for your specific vehicle configuration to ensure a proper fit and optimal clearing performance in adverse weather.