The 2022 Honda Odyssey with its 3.5-liter V6 engine typically requires about 5.5 quarts (approximately 5.2 liters) of engine oil when performing an oil change with the filter replaced, using the recommended 0W-20 oil.
This figure comes from Honda’s official specifications for the 3.5 L V6 used in the Odyssey. The specification assumes the oil filter is replaced and uses SAE 0W-20 for normal driving conditions. Always refer to your vehicle’s owner’s manual for region-specific details and verify oil level with the dipstick after adding oil.
Official oil capacity and specifications
According to the 2022 Odyssey owner’s manual, the engine oil capacity is 5.5 quarts (5.2 L) with the filter installed. The recommended viscosity is SAE 0W-20. Use the oil and filter recommended by Honda to ensure proper lubrication and performance.
Key figures you should know before an oil change:
- Engine oil capacity (with filter): 5.5 quarts (5.2 liters)
- Recommended oil viscosity: SAE 0W-20
After listing these figures, remember to check the oil level with the dipstick and top off gradually if needed. Properly securing the filter and using the correct grade helps maintain engine longevity and performance.
What changes the capacity?
The official capacity assumes the oil filter is replaced. If a filter is not replaced, the system may appear to hold a slightly different amount, but for maintenance purposes follow the manual and replace the filter during the oil change to ensure accurate capacity and proper filtration.
Practical takeaway
When planning an oil change for a 2022 Odyssey with the 3.5 L engine, prepare about 5.5 quarts of SAE 0W-20 oil and replace the oil filter. After adding oil, run the engine briefly, turn it off, wait a moment, and recheck the level with the dipstick, topping up as needed to reach the full mark.
Summary
The 2022 Honda Odyssey’s 3.5 L V6 engine uses about 5.5 quarts (roughly 5.2 liters) of SAE 0W-20 oil when performing an oil change with the filter. Always verify with the owner’s manual and the dipstick after filling to ensure the oil level is correct.