The 2018 Camry uses a cartridge-style oil filter, and the typical OEM replacement is Toyota part number 04152-YZZA1. This article explains the filter type, how to confirm the correct part for your engine, and basic replacement steps.
Filter type and part number
In 2018, Camry offered two engines: a 2.5-liter dynamic-force four-cylinder and an optional 3.5-liter V6. Both use a cartridge-type filter that sits inside a dedicated housing under the engine. The standard Toyota OEM replacement for these engines is generally 04152-YZZA1. When shopping aftermarket, look for a cartridge-style filter that matches the same size, thread, and gasket specifications as the OEM part.
To confirm the exact filter for your specific vehicle, use the following checks:
- Check the label on your current oil filter cap or the service manual for the exact part number.
- Match the engine code (for most 2018 Camrys, this is the 2.5L or 3.5L engine family) to ensure compatibility with the chosen filter.
- Provide your VIN to a Toyota parts supplier to verify the correct filter family and part number.
- When buying aftermarket, use a cross-reference to ensure the filter has the same filtration capacity and thread size as the OEM.
In summary, the typical replacement for a 2018 Camry is the cartridge oil filter Toyota Genuine Part 04152-YZZA1, with verification via VIN, engine code, or cap labeling.
Replacement steps (cartridge filter)
If you plan to replace the filter yourself, follow these steps to ensure a proper seal and leak-free operation:
- Warm up the engine briefly, then turn it off and engage the parking brake.
- Lift the front of the car and support with jack stands if needed; ensure the engine is cool before working.
- Place a drain pan under the oil pan, remove the drain plug, and let the oil drain out completely.
- Remove the oil filter housing cap to access the cartridge filter.
- Take out the old cartridge, clean the inside of the housing, and inspect/replace the O-ring on the cap if necessary.
- Install the new cartridge filter, re-seat the housing cap with a snug fit (do not overtighten).
- Refill with the recommended oil type and quantity, then start the engine and check for leaks.
Bottom line: The 2018 Toyota Camry uses a cartridge-style oil filter, with 04152-YZZA1 being the typical OEM part. Always verify the exact part via your VIN/engine code or cap label, and use OEM or properly cross-referenced aftermarket filters for reliable performance.
Summary
For 2018 Camry models, the oil filter is cartridge-based and compatible with Toyota's 04152-YZZA1 part number. Confirm the correct filter by checking the current cap label, engine code, or VIN, and choose either the OEM part or a reputable aftermarket cross-reference. Regular replacement with the correct cartridge filter helps maintain engine longevity and optimal oil flow.