The 2019 Jeep Cherokee with the 3.6-liter Pentastar V6 generally takes about 6 quarts (5.7 liters) of engine oil when performing a full oil change with the filter, using 5W-20 synthetic oil.
This capacity applies to the 3.6L V6 option in the Cherokee lineup. Some trims or model years offer different engines, such as a 2.4L inline-4, which uses a different oil capacity. Always verify with the owner's manual or check the dipstick during maintenance to be certain for your specific vehicle.
Oil capacity and specifications
Below are the key figures for the 3.6L Pentastar engine in the 2019 Cherokee.
- Oil capacity with filter: 6 quarts (5.7 liters).
- Recommended oil grade: SAE 5W-20 synthetic.
- Oil type guidance: Full synthetic is preferred; a synthetic-blend is acceptable if full synthetic is not available.
In practice, prepare to add roughly 6 quarts of oil after a standard drain-and-fill, and always start with a clean filter. After filling, recheck the level with the dipstick and top up in small increments if needed to reach the correct level.
Summary
The 2019 Cherokee with a 3.6L V6 typically requires about 6 quarts (5.7 liters) of oil with a new filter, using 5W-20 synthetic oil. This guidance helps with planning oil changes, but always confirm via the owner's manual for your exact vehicle and maintenance specs.
How many quarts of oil does a 2019 Jeep Cherokee 3.6 take?
5.9 quarts
Oil Grade: SEO11
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.9 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
What kind of oil does a 2019 Jeep 3.6 take?
2019 Jeep Wrangler Oil Type
2.0L Turbo Engine: SAE 5W-30 Full Synthetic (API SN Plus) — 5.5 quarts with filter. 3.6L V6: SAE 0W-20 Full Synthetic (API Starburst) — 5 quarts with filter.
What are the common Cherokee repairs?
The most common Jeep Grand Cherokee problems include transmission issues, electrical problems, suspension wear, oil leaks, and brake wear, especially on certain older model years.
What kind of oil does a 2019 Jeep Cherokee V6 take?
6 Liters of Fully Synthetic Eurol Evolence 5W20 Motor Oil - Meets or exceeds the recommended Chrysler MS-6395 oil quality specification and performance characteristics required for the Jeep Cherokee 3.2L V6 engine.