The 2016 Honda Accord with a V6 engine requires about 5.7 quarts of oil when you replace the filter, which is roughly 5.4 liters. Without changing the oil filter, the engine capacity is about 5.3 quarts.
Oil capacity specifics for the 2016 Accord V6
The Accord’s V6 uses a 3.5-liter engine, and Honda specifies an oil capacity of 5.7 quarts (with filter) for a standard oil change. If you do not replace the filter, the capacity is around 5.3 quarts. These figures are intended to cover the engine’s oil sump and the filter’s volume, and they assume a complete drain followed by a fresh filter installation.
Here are the key figures you should know before an oil change.
- With a new oil filter: 5.7 quarts (approximately 5.4 liters).
- Without the filter: 5.3 quarts (approximately 5.0 liters).
Bottom line: plan for about 5.7 quarts when performing a full change with a new filter, and use the dipstick to verify the final oil level after adding oil.
Oil type and maintenance guidance
Recommended oil type
Honda recommends 0W-20 full synthetic oil for the 2016 Accord V6. Using a synthetic oil that meets API SN or newer and ILSAC GF-5/GF-6 specs helps protect the engine and maintain fuel efficiency.
Oil-change interval and best practices
Oil-change intervals are typically guided by Honda’s maintenance minder system. In normal driving, many owners find intervals around 5,000–7,500 miles, but conditions such as heavy city driving, towing, or extreme temperatures can shorten this window. Always refer to the vehicle’s maintenance minder and the owner’s manual for the most accurate schedule.
Summary
The 2016 Honda Accord V6 uses about 5.7 quarts of oil when performing a full change with a new filter (5.4 liters), and about 5.3 quarts without changing the filter. Use 0W-20 synthetic oil and follow the maintenance minder-driven schedule for oil changes. Always verify the final oil level with the dipstick after a fill.