For a 2015 Honda Accord, you should use an oil filter that matches your engine and meets Honda’s specifications. In practice, use a Honda Genuine oil filter designed for your engine (2.4L inline-4 or 3.5L V6), or a reputable aftermarket filter that is explicitly compatible with Honda engines and 0W-20 synthetic oil. To be certain, verify the exact part number using your VIN or the owner's manual.
Engine options in the 2015 Accord
The 2015 Accord was offered with two engines in North America: a 2.4-liter four-cylinder and a 3.5-liter V6. Each engine requires its own filter specification, so identifying the correct powertrain is the first step before purchasing a filter.
- 2.4L inline-4 engine: Use a Honda Genuine oil filter designed for the 2.4L Accord, or an approved aftermarket filter that specifically states compatibility with Honda 2.4L engines and 0W-20 synthetic oil.
- 3.5L V6 engine: Use the Honda Genuine oil filter designed for the 3.5L engine, or an approved aftermarket filter that explicitly lists compatibility with Honda 3.5L engines and 0W-20 synthetic oil.
Whether you choose OEM or aftermarket, the crucial factor is ensuring the filter matches your exact engine and oil specification, not merely the brand name.
OEM vs aftermarket: what to consider
Official Honda filters are built to exact tolerances and guaranteed fit for the intended engine. Aftermarket filters vary in build quality. If you go aftermarket, look for filters labeled as compatible with Honda or Acura engines and rated for 0W-20 synthetic oil. Check for reputable brands and verify the filter’s compatibility with your specific 2015 Accord engine using the VIN or a parts lookup.
Oil specification and filter compatibility
Honda generally recommends 0W-20 full-synthetic oil for the 2015 Accord, though some markets may permit 5W-20 in milder climates. Using the correct oil grade helps ensure optimal filtration and engine longevity. When selecting a filter, confirm it’s designed for synthetic oil and for the correct engine size (2.4L or 3.5L).
Before you buy, confirm the exact part by engine and vehicle configuration using these steps:
- Consult the owner’s manual or under-hood label for the recommended oil grade and filter compatibility.
- Enter your VIN on Honda’s parts site or ask a dealer to pull the precise filter part number for your vehicle.
- When shopping aftermarket, ensure the filter is listed as compatible with Honda 2.4L or 3.5L engines and 0W-20 oil.
In practice, always verify the part number before purchase, especially if a listing claims to fit “Honda” without specifying the Accord model or engine size.
DIY replacement steps
If you’re planning a do-it-yourself change, follow these general steps to replace the filter safely and correctly.
- Warm the engine slightly, place a drain pan underneath, and remove the engine oil drain plug to drain used oil.
- Loosen and remove the old oil filter with the appropriate filter wrench or by hand, allowing any residual oil to drain into the pan.
- Install the new filter by hand, then tighten according to the manufacturer’s guidelines (usually a snug turn after seating). Do not overtighten.
- Reinstall the drain plug, replace the oil with the correct quantity and grade of oil (commonly 0W-20 for the 2015 Accord), and check for leaks after starting the engine.
Bottom line: use a filter that matches your engine and oil specification, install it correctly, and verify oil level after the change.
Bottom line
For a 2015 Honda Accord, the safest approach is to use a Honda Genuine oil filter matched to your engine (2.4L I-4 or 3.5L V6). If you choose an aftermarket option, ensure it explicitly supports Honda engines and 0W-20 synthetic oil, and confirm the exact part number with your VIN or service manual to guarantee a proper fit.
Summary
Identify your engine (2.4L or 3.5L) and use the corresponding filter, preferably Honda Genuine or a proven aftermarket that lists Honda compatibility and 0W-20 oil support. Always verify the part number via VIN or official parts lookup, and follow proper steps when replacing the filter to maintain engine protection for your 2015 Accord.
What kind of oil does the Honda Accord 2015 take?
The recommended Honda Accord oil is generally a synthetic 0W-20 formula.
Ask More
What is the part number of the Honda oil filter?
15400-PLM-A02
Genuine Honda Oil Filter - 15400-PLM-A02.
Ask More
What type of oil filter do I need for a 2015 Honda Accord?
This OEM Honda oil filter, part number 15400-PLM-A02, fits select Honda vehicles from model years 2000 all the way to 2021. Its job is to collect both the impurities in motor oil and whatever else accumulates as the oil lubricates engine parts.
Ask More
What oil filter do I need for my Honda Accord?
15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.
Ask More