The 2016 Honda Accord with the 3.5-liter V6 engine requires about 5.7 quarts (roughly 5.4 liters) of engine oil for a full change with a new filter. The recommended oil grade is 0W-20 full synthetic in most markets. This article outlines the official capacity, the expected oil type, and practical tips for carrying out the change.
Capacity and oil specifications
Key details you’ll need when planning an oil change are summarized below.
Note: The official capacity is 5.7 quarts with a new filter. When topping off after a complete change, you’ll typically target the full mark on the dipstick, and using a new filter will bring you to the full 5.7-quart figure.
- Oil capacity (with filter): 5.7 quarts (about 5.4 liters)
- Recommended oil grade: 0W-20 full synthetic (regional variations may apply; check the owner’s manual)
- Suggested purchase amount: plan for about 6 quarts to account for small losses and spills during the change
- How to verify: after adding oil and running the engine, let it settle, then check the dipstick and top off to the full mark if needed
Following these guidelines helps ensure the engine maintains proper lubrication and avoids underfilling, which can affect performance and longevity. Always confirm against the specific manual for your vehicle’s region and any variations in the oil specification.
Summary
For the 2016 Honda Accord with the 3.5-liter V6, anticipate about 5.7 quarts of engine oil for a full change using a new filter, with 0W-20 full synthetic oil as the standard specification. Verify the exact figures in your owner's manual and purchase a little extra to cover any small discrepancies or spills.