For a quick answer: the 2016 Honda Accord with the 3.5-liter V6 generally requires about 5.7 quarts of engine oil when performing a full oil change with a new filter, and roughly 5.0 quarts if you’re not changing the filter. Use a full-synthetic 0W-20 oil in most climates, and always verify the level with the dipstick after filling.
The exact capacity can vary slightly depending on whether you replace the oil filter and regional specifications. Always confirm by checking the dipstick and consulting the owner's manual for your market.
Oil capacity details for the 3.5L V6
This section outlines the typical oil-fill capacities you’ll encounter during a standard oil change for this engine. The numbers assume a fresh filter and standard filling practices.
- Oil capacity with filter: 5.7 quarts (approximately 5.4 liters).
- Oil capacity without filter: 5.0 quarts (approximately 4.7 liters).
In practice, you’ll add about 5.7 quarts during a full change and then top up as needed after checking the dipstick. If you’re not replacing the filter, you’ll start with around 5.0 quarts and verify the level.
Recommended oil and service tips
The vehicle’s maintenance guidance centers on modern synthetic oils and climate-appropriate viscosity for the 3.5 L V6. Following these guidelines helps protect the engine and maintain performance.
- Viscosity: 0W-20 is standard for most climates; 5W-20 can be used where 0W-20 is not recommended or unavailable.
- Oil type: Full synthetic or synthetic blend meeting API SN/SN Plus and ILSAC specifications.
- Change interval: Typically every 5,000–7,500 miles with synthetic oil, or per the owner's manual and driving conditions.
Always install a new oil filter during an oil change, and recheck the level after filling and running the engine to ensure it’s within the recommended range.
Summary
The 2016 Honda Accord 3.5 L V6 typically takes 5.7 quarts of engine oil with a new filter, and about 5.0 quarts if the filter is not replaced. Use 0W-20 full synthetic oil in most climates, verify the level with the dipstick, and consult the owner's manual for exact specifications and maintenance guidance.