The engine oil capacity for the 2013 Audi S4 is about 8 quarts (7.6 liters) when changing the oil and filter.
The 2013 S4 uses a 3.0-liter TFSI V6 with a supercharger, and the exact amount can vary slightly by market, filter type, and whether you drain completely. Always consult the owner's manual or service data for your VIN to confirm the precise figure and the recommended oil grade for your climate.
Capacity details and maintenance notes
Below are the core figures and practical reminders to help plan an oil change for this model.
- Capacity with filter: 8 quarts (about 7.6 liters).
- Recommended oil grade: typically 5W-40 in many regions; some climates use 5W-30. Verify the specification in your owner's manual or service data for your locale.
- Recommended procedure: during an oil change, reinstall a new filter, fill to the full line on the dipstick after initial startup and check level again when the engine is warm.
Note that some variations may apply depending on production date, market, or changes to the filter or drain hardware. Always reference the official manual for the exact specification.
Region-specific notes
In Europe and many other markets, 5W-40 is commonly specified, while in colder climates 5W-30 may be used; Always confirm the exact grade for your area.
How to verify the oil level
To check the level: park on level ground, run the engine briefly, turn it off, wait a few minutes for the oil to settle, then pull the dipstick, wipe, reinsert, and read between the min and max marks. Refill in small amounts if needed and re-check after the engine has warmed up.
Summary
The 2013 Audi S4 generally takes about 8 quarts (7.6 liters) of engine oil with a filter. Use the correct grade for your climate, usually 5W-40, and always verify the exact specification in the owner's manual or Audi service data for your VIN. Proper oil changes help protect the turbocharged 3.0L V6 and maintain performance.