Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size windshield wipers for a 2010 Honda Fit?

The front blade sizes for a 2010 Honda Fit are typically 24 inches on the driver’s side and 17 inches on the passenger’s side; some models with a rear wiper may also use an 11-inch rear blade. Always verify using the owner's manual or parts lookup for your exact configuration.


Front wiper blade sizes


Typical sizes used on US-market 2010 Fits are documented as follows:



  • Driver side: 24 inches

  • Passenger side: 17 inches


These sizes ensure full coverage and proper contact with the windshield. If your blades are worn or you are replacing due to streaking, replace both sides with the same style and ensure correct attach type (hook, pin, or bayonet). It's common to buy a 2-blade set or two separate blades sized accordingly.


Rear wiper (if equipped)


Some 2010 Fit trims include a rear window wiper. The typical size is around 11 inches. If your vehicle does have a rear wiper, confirm the size from the owner's manual or measure the blade.



  • Rear wiper: approximately 11 inches


Rear wiper performance matters for rear visibility; ensure you buy the exact size and correct adapter if needed.


How to verify exact sizes for your car


To confirm the exact wiper sizes for your specific vehicle, you can:



  1. Check the owner's manual under the maintenance or wiper blade section.

  2. Measure the current blade length from end to end.

  3. Use Honda's official parts lookup or a trusted auto parts retailer by entering the year, make, model, and trim.


If you are unsure or between sizes, purchasing a universal blade with the correct length or visiting an auto parts store for assistance can help, as manufacturers often update blade designs and compatibility.


Choosing the blade type


Beyond size, you should consider blade construction (beam vs. traditional frame), climate, and durability. Beam blades tend to offer even pressure and better performance in snow and freezing conditions, while traditional blades are typically affordable and widely compatible.


Ensure that you select blades with compatible attachment mechanisms (hook, pin, or bayonet) and the appropriate connector for your Fit's wiper arms.


Summary


The standard front wiper sizes for a 2010 Honda Fit are 24 inches on the driver’s side and 17 inches on the passenger’s side, with an 11-inch rear blade on models that include a rear wiper. Always verify with the owner’s manual or a reliable parts lookup to account for regional variations or trim differences, and choose a blade type suited to your climate.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.