For most Honda models, the compressor part itself typically costs between $150 and $650, and fully installed replacements commonly run from about $700 to $1,800, depending on the model, refrigerant type (R134a vs R1234yf), and local labor rates. The price can be higher for newer or specialty models and when additional components are included in the job.
What affects the cost
Options and compatibility
Several factors influence the overall price of replacing a Honda AC compressor. The model year and exact engine, the type of compressor (OEM Honda vs aftermarket vs remanufactured), refrigerant type, and what else is included in the job (receiver/drier, expansion valve or orifice tube, seals) can all push costs up or down.
- Vehicle model and year determine fit and required refrigerant type (R134a vs R1234yf).
- Compressor option: new OEM, aftermarket, or remanufactured units.
- Refrigerant type and system service needs (recharging and evacuation).
- Additional components included with the replacement (receiver/drier, expansion valve, orifice tube, hoses or seals).
- Labor rates and regional shop costs.
- Warranty terms and brand reliability.
Understanding these factors helps you anticipate variations and plan your repair budget.
Typical price ranges for Honda AC compressors
Breakdown of price components
Prices can vary based on part quality and inclusion. The ranges below reflect common scenarios for commonly sold Honda AC compressors in the U.S. as of 2024–2026:
- Compressor (new, OEM or reputable aftermarket): typically about $160–$600
- Remanufactured compressor: roughly $100–$350
- Labor to remove and install the compressor: about $300–$900
- Refrigerant charge and system service (R134a or R1234yf): about $40–$150
- Total installed price (parts plus labor): commonly $700–$1,800
Note that models using the newer R1234yf refrigerant or those requiring additional parts can push the total closer to the upper end of the range. Always obtain multiple quotes with model/year details.
What to consider before buying
Compatibility and inclusions
Before purchasing a compressor, consider the exact refrigerant type your Honda uses, compatibility with your year and engine, and what comes with the unit. Some kits include the receiver/drier and the expansion valve or orifice tube, while others sell the compressor alone. Warranty terms also matter.
- Confirm the right refrigerant type (R134a vs R1234yf) and the correct compressor model for your Honda.
- Choose OEM or reputable aftermarket; remanufactured units can offer savings with warranty considerations.
- Check what’s included (receiver/drier, expansion valve, seals) to avoid surprise costs.
- Review warranty length and coverage for the part and any labor.
- Budget for labor and a system recharge; some shops require additional parts or service.
Thoroughly verify that the part matches your car’s specifications and that the shop will perform a complete system service for best results.
Where to buy and how to save
Shopping sources
There are multiple reliable channels to source a Honda AC compressor. Shopping around and comparing warranties, return policies, and total installed quotes can yield savings.
- OEM Honda dealerships for the exact fit and manufacturer warranty.
- Major auto parts stores (AutoZone, O'Reilly, NAPA) offering OEM-equivalent and aftermarket options.
- Online retailers (RockAuto, Amazon Automotive, or the retailer's own site) with price comparisons and parts diagrams.
- Independent repair shops that may price by job and offer bundled service for your compressor replacement.
Compare quotes for the compressor, any needed ancillary parts, refrigerant, and labor. Ask about warranties and whether the price includes a full system evacuation and recharge.
Summary
Replacing a Honda AC compressor is a mid-size repair that varies by model, refrigerant type, and local labor rates. In general, expect part costs in the low hundreds and total installed costs in the range of about $700 to $1,800, with higher-end models or premium parts pushing beyond that. Get multiple detailed quotes, confirm the refrigerant type, and ensure the rest of the AC system is serviced during replacement.