For a 2013 Nissan Rogue, you’re typically looking at about $60–$250 for the wheel hub bearing unit per wheel, with total installed price around $200–$500 per axle depending on parts and labor.
What affects the price
Wheel bearings in the Rogue are sold as hub assemblies that include the bearing and the wheel sensor (in many models). The price varies by front vs rear position, and by brand: aftermarket vs OEM. Labor costs vary by region and shop. The exact price depends on whether both sides are replaced and whether it is a front or rear axle.
Part price ranges
Prices cover hub assemblies only; if you already have a hub/bearing core or opt for a remanufactured unit, the price can be lower. The following ranges reflect common options in the United States as of 2024–2026.
- Aftermarket wheel hub bearing assembly (front or rear): typically $60–$180 per hub.
- OEM/Nissan-branded hub assembly: about $120–$250 per hub.
- Premium or sensor-integrated hubs (with ABS): about $180–$350 per hub.
- Remanufactured hub assemblies: about $60–$150 per hub.
Part price takeaway: Expect a wide range depending on brand and whether the hub includes ABS or other sensors. Shop around to compare prices for the specific wheel position and model year.
Labor costs
Labor to replace a wheel hub assembly generally runs per axle and depends on local rates, shop policies, and whether other brake or axle work is included. Here are typical ranges:
- Labor to replace a front hub: roughly $120–$250 per axle.
- Labor to replace a rear hub: roughly $100–$220 per axle.
- Special cases (tightened axle nuts, rusted components, ABS sensor calibration): may add $20–$60.
Labor cost drivers: brake rotor removal, axle nut torque, sensor wiring, and potential wheel bearing pre-load requirements. Always confirm if the quote includes ABS recalibration if necessary.
Labor takeaway: Expect total installed price per axle in many markets of roughly $200–$500, depending on front vs rear and the shop.
Total installed price expectations
Putting parts and labor together, most owners replacing a wheel hub bearing on a 2013 Nissan Rogue should budget around the following ranges, per axle. These figures are guidelines and can vary by location and options chosen.
- Front axle (hub assembly replacement): approximately $260–$520 installed.
- Rear axle (hub assembly replacement): approximately $240–$420 installed.
Note: If both sides are replaced at the same time, some shops offer a discount on labor, but parts costs will double. Always obtain a written estimate that itemizes parts and labor.
Summary: For a 2013 Nissan Rogue, wheel bearing/hub replacement costs usually run in the low hundreds per wheel for parts and a similar amount for labor, depending on front vs rear and the chosen part brand. Checking multiple shops and retailers can help you secure the best price.
Practical tip: When shopping for parts, verify compatibility for your exact trim and ABS configuration, and confirm whether the hub includes the ABS sensor. You can compare prices on AutoZone, Advance Auto Parts, RockAuto, or with Nissan dealer parts counters to get current pricing in your area.
Summary: In most cases, budget roughly $200–$500 per axle for a typical wheel hub bearing replacement on a 2013 Nissan Rogue, with variations based on front vs rear and whether you choose aftermarket or OEM parts. Always compare quotes for the most accurate figure in your locale.