A new engine installed in a Chrysler 200 typically runs roughly $4,000 to $9,000, depending on engine type and who does the work.
Two main engine options powered the Chrysler 200 during its production: a 2.4-liter Tigershark inline-four and, on higher trims, a 3.6-liter Pentastar V6. Because the model was discontinued after 2017, factory-new engines are harder to source, and most quotes reflect remanufactured or aftermarket options. The final price will depend on whether you buy a brand-new crate engine, a remanufactured unit, or a used long block, plus labor, fluids, and any additional parts or upgrades included in the replacement.
Engine options and price ranges
The two main engine types you’ll encounter
The Chrysler 200 offered primarily two engine configurations over its lifetime. The price you see for a replacement depends on which engine your specific car uses, plus whether you source a new crate engine, a remanufactured unit, or a used long block. Here are typical ballpark ranges for engines sourced as new or rebuilt, with installation extra:
- New OEM crate engine, 2.4L Tigershark: typically $3,000–$5,000 plus a core deposit and shipping
- New OEM crate engine, 3.6L Pentastar: typically $3,500–$6,000 plus core deposit and shipping
- Remanufactured long block, 2.4L: typically $2,800–$4,500
- Remanufactured long block, 3.6L: typically $3,500–$5,500
- Used long block (lower-cost option, limited warranty): typically $1,500–$3,000
Note that these figures are approximate ranges based on typical market quotes as of mid-2020s. Actual prices can vary by region, supplier, shipping costs, core charges, and warranty terms. Always request a full written quote that breaks down parts and labor.
What affects the price and installation
Key factors that influence final quotes
Several elements determine the final cost of a Chrysler 200 engine replacement beyond the base price of the engine itself:
- Engine source: OEM crate, remanufactured, or used long block
- Labor rates and shop hours required for installation
- Inclusions: timing components (timing chain/belt kit), water pump, seals, gaskets, fluids, and filters
- Additional parts or upgrades: intake and exhaust connectors, sensors, wiring harnesses, and ECU programming
- Core charge and shipping; taxes and any disposal fees
- Warranty coverage on the engine and labor
Because the Chrysler 200 line ended in 2017, some dealers and independent shops may rely on remanufactured or aftermarket options, which can affect both price and warranty terms. Always verify what is included in the price and what the warranty covers.
How to shop for a quote
Tips for getting clear, apples-to-apples estimates
To avoid surprises, use these steps when requesting quotes and comparing offers:
- Specify the exact engine type in your car (check the VIN or door jamb sticker) so quotes reflect the correct engine
- Ask whether the price is for a brand-new crate engine, a remanufactured unit, or a used long block
- Request a full breakdown: engine price, labor hours, fluids, gaskets/seals, timing components, taxes, core charges, and shipping
- Confirm what's included in the warranty (engine, parts, labor, and duration)
- Get quotes from at least two or three reputable shops or dealers to compare
The right question set helps you determine not just the lowest price, but the best value in terms of reliability, coverage, and overall fit for your vehicle’s needs.
Summary
For a Chrysler 200, replacing the engine typically costs several thousand dollars, with installed prices generally in the $4,000–$9,000 range depending on engine type, source, and labor. The 2.4L Tigershark and the 3.6L Pentastar are the two primary options, and because the model is no longer in production, many quotes come from remanufactured or aftermarket engines rather than factory-new units. Always obtain a detailed written quote that separates engine price, labor, and ancillary costs, and consider the long-term value and warranty when making your decision.
Is Chrysler 200 expensive to repair?
The estimated cost to maintain and repair a Chrysler 200 ranges from $105 to $2127, with an average of $331.
Is it cheaper to fix an engine or replace it?
It may be a cheaper option: A full engine rebuild costs about $2,500 to $4,000. Rebuilding may make sense if the damage is limited and the engine's core is still in good shape. But if the engine has widespread failure or high mileage, a replacement may offer more long-term reliability.
What is the most common problem with Chrysler 200?
Owners have reported a wide variety of transmission problems ranging from rough shifting, hesitation during acceleration, and even complete transmission failure. While there have been some recalls issued for some models addressing these issues, problems still persist for others.
How much does a complete engine replacement cost?
Key Facts. The average cost of engine replacement in the US is $6,287 to $12,878, depending on the vehicle's make and model and the mechanic's labor fee.