Prices for replacing a 2010 Ford Taurus engine typically range from about $3,000 to $6,000 installed, depending on the engine type and labor costs. The engine itself usually costs between roughly $1,500 and $4,500.
Engine options and price ranges
The 2010 Ford Taurus uses a 3.5L Duratec V6 in most configurations. When shopping for a replacement, buyers mainly choose between used/remanufactured engines, rebuilt/remanufactured units from suppliers, or, in rare cases, a new OEM crate engine. These options drive the cost of the engine itself and, in turn, the total installed price.
Common engine options for a 2010 Taurus
- Used or aftermarket rebuilt 3.5L Duratec V6 engine: typically $1,500–$3,000 for the engine itself, depending on mileage and condition.
- Remanufactured/rebuilt engine from retailers: usually $2,500–$4,500 for the engine, often with a warranty.
- New OEM crate engine (rare for this model): generally $4,000–$6,000+ for the engine itself, with installation extra.
Prices vary by source, mileage, and condition. If you’re considering a salvage-yard engine, verify compatibility, mileage, and core return terms, and factor in potential additional costs for mounting hardware and wiring.
Installation costs and total project price
Labor is the major variable in the total installed price. Replacing a Taurus engine is a substantial job that requires time, skill, and proper equipment. Shop rates and local labor markets strongly influence the final number.
- Labor to install a replacement engine: commonly 12–20 hours at typical shop rates of roughly $75–$125 per hour, translating to about $900–$2,500 in labor costs.
- Additional costs to complete the job: timing components (if needed), water pump, seals, gaskets, fluids, spark plugs, hoses, belts, and an ECM reprogramming or relearn may add $300–$1,200.
- Other considerations: core charges, shipping for a used or rebuilt engine, or fees for engine removal and disposal can affect total price.
In most cases, you should expect a total installed price in the ballpark of $3,000 to $6,000. Higher costs occur with complex jobs, scarce sourcing, or premium warranties; lower-end estimates appear when using a solid used engine and lean labor charges.
Where to buy and how to compare quotes
Finding the right engine source is crucial for value and reliability. Different channels offer different price bands, warranties, and service levels. Always request warranty terms and confirm compatibility with your vehicle’s VIN and options.
- Salvage yards and junkyards: often the lowest engine price, typically $500–$2,000 for the engine alone, with variable warranties and limited guarantees.
- Major auto parts retailers and engine remanufacturers: common sources for rebuilt/remanufactured engines ($2,500–$4,500) with longer warranties and clearer return policies.
- Dealerships and official service providers: may offer OEM remanufactured engines and installation, often at the high end of the price spectrum but with comprehensive warranties.
- Online marketplaces and independent shops: can yield competitive quotes but require careful vetting for condition, shipping, core charges, and warranty.
Always compare multiple quotes, ask about engine mileage, warranty length (and what it covers), core charges, and whether the price includes timing components, gaskets, fluids, and ECM programming. A written estimate with a detailed breakdown helps avoid surprises.
Getting a precise quote
To obtain an accurate figure for your specific Taurus, contact local shops and part suppliers with your vehicle’s VIN, the exact engine option you want (or the engine you’re replacing), and your preferred warranty length. Many shops will perform a quick diagnostic to confirm whether any supporting repairs are needed beyond the engine replacement.
Pro tip: requesting a bundled price (engine + labor + common misc.) and a separate line for optional add-ons can help you compare apples-to-apples across vendors.
Summary
For a 2010 Ford Taurus, the engine replacement price hinges on the engine source (used, remanufactured, or rare new), labor costs, and regional rate differences. Engine-alone costs typically range from about $1,500 to $4,500, with installed prices commonly falling between $3,000 and $6,000. The best approach is to compare several quotes, verify warranties, and ensure compatibility with your VIN before proceeding.
In the end, securing multiple quotes and choosing a reputable supplier with clear warranty terms will help ensure you get a reliable engine replacement at a fair price.
How much is a 2010 Ford Taurus worth today?
2010 Ford Taurus Value - $928-$4,729 | Edmunds.
What are signs of a failing Ford engine?
Signs your engine is about to fail, and how to tell if it's time...
- Low oil pressure. If your oil is at the correct level, but your gauge reads excessively low or your oil pressure light is on, you have an oil pressure problem.
- Knocking.
- Compression Issues.
- Excessive oil consumption.
How long do Ford Taurus engines last?
300,000 miles
Ford Taurus 3.0 engine still running well
Her 3.0 still runs good for almost 300,000 miles on it.
What is the most common problem with the 2010 Ford Taurus?
Top 2010 Ford Taurus Problems
- Engine Buck/Misfire at Freeway Speeds.
- Camshaft Sensor Magnet may Damage Synchronizers.
- automatic lights not working.
- A/C Fan Speed Changing Constantly.
- Ford Taurus water pump failure causing coolant contamination and engine damage.