Part costs for the fuel pump assembly in a 2011 Camry typically range from about $100 to $650, depending on aftermarket versus genuine OEM. Labor to install the pump usually runs $180 to $450. In total, expect installed costs around $280 to $1,100, though regional differences and warranty can shift the final number.
The exact price you pay depends on the Camry’s engine variant (2.5L four-cylinder or 3.5L V6), whether you’re buying a complete in-tank sending unit or a replacement module, and whether you choose an aftermarket, remanufactured, or genuine Toyota part. Location, labor rates, and whether other related work is needed can also affect the final bill.
What affects the price
Several factors determine final costs, including engine variant, part configuration, and the choice between OEM, aftermarket, or remanufactured units. The installation process and shop rates also influence the total.
Engine and part configuration
The 2011 Camry offers different powertrains (2.5L four-cylinder or 3.5L V6). Fuel pumps are in-tank assemblies, and while the basic function is the same, the exact sending unit and compatibility can vary by engine code and trim, modestly affecting price.
New vs remanufactured vs aftermarket
Genuine Toyota OEM pumps tend to be pricier but may come with stronger warranties. Remanufactured or aftermarket units are cheaper upfront, but quality and warranty terms can vary. Always check part numbers and compatibility with your VIN.
Labor and installation considerations
Installing a fuel pump requires dropping the fuel tank, which can involve extra labor if the tank is full, if access is blocked, or if risk of corrosion exists. Labor costs vary by shop and region and can be higher if additional components (like fuel lines or sending units) need attention.
Pricing options
Prices for fuel-pump parts fall into several tiers. The ranges below reflect common market options for a 2011 Camry as of 2024–2026.
- OEM Toyota fuel pump assembly (in-tank, sending unit included) — roughly $300 to $650 (parts only, depending on region and exact model).
- Aftermarket or remanufactured fuel pump assemblies — roughly $100 to $250 (parts only; some brands may be cheaper or pricier).
- Installation labor — typically $180 to $450, depending on local rates, shop policies, and whether any related work is required.
In practice, total installed costs usually fall in the broad range of about $280 to $1,100, with the wide spread driven by part choice and labor rates across regions.
Where to buy and install
Shoppers have multiple avenues to source the fuel pump, and choices often balance price, warranty, and convenience. Always confirm compatibility with your Camry’s engine code and VIN before purchase.
- Authorized Toyota dealer or OEM parts suppliers — typically the most reliable for compatibility and warranty, but at the higher end of price.
- National auto parts chains and reputable online retailers (AutoZone, Advance Auto Parts, RockAuto, Amazon) — often cheaper and offer a variety of brands and warranties.
- Independent shops and local mechanics — can provide competitive labor rates and personalized service; verify certifications and warranty terms on parts.
Call ahead to confirm part numbers, availability, and lead times. If you’re considering DIY, ensure you have safe access to the fuel system and the tools required to safely depressurize the fuel system and remove the tank.
Cost-saving tips
To keep costs manageable, consider shopping around and planning ahead. The following tips can help you get a reliable part at a fair price without compromising safety.
- Get multiple quotes from reputable shops; ask for a separate line item for parts and labor.
- Check warranties on aftermarket parts and labor; a longer warranty can offset higher upfront costs if issues arise.
- Consider a remanufactured unit with a solid warranty if comfort with aftermarket brands is present; ensure compatibility with your trim and engine.
Careful shopping and clear communication with the installer can prevent surprises and help you lock in a price that fits your budget.
Summary
For a 2011 Toyota Camry, fuel pump replacement costs depend on part choice and labor. Expect part prices from about $100 to $650 and labor around $180 to $450, with total installed costs typically spanning roughly $280 to $1,100. Verify compatibility with your engine variant and VIN, compare several quotes, and weigh OEM versus aftermarket options to balance cost and reliability. A well-chosen pump keeps fuel delivery dependable and reduces the risk of future repairs.


