For a 2013 Chrysler 300, a new fuel pump assembly typically costs about $200–$500 for the part, with installed labor pushing total toward $400–$900 depending on engine type (3.6L V6 or 5.7L Hemi), location, and shop rates.
Part costs and options
Prices vary by whether you choose OEM Mopar parts, aftermarket equivalents, or a rebuilt unit. Here is a general guide to the parts you might buy for the in-tank fuel pump assembly.
- OEM Mopar fuel pump assembly (in-tank module with sending unit): roughly $260–$520.
- Aftermarket in-tank fuel pump module (Bosch, Delphi, etc.): roughly $120–$350.
- Remanufactured/used fuel pump assemblies: roughly $70–$180.
Conclusion: Part costs vary by supplier, warranty, and whether you choose OEM or aftermarket; the ranges above reflect typical pricing in 2024–2026.
Engine options affecting price
The 2013 Chrysler 300 offered multiple powertrains, including a 3.6L V6 and, in some trims, a 5.7L Hemi. While the pump mechanism is similar, availability and part numbers can influence price slightly and affect compatibility checks with your VIN.
Labor and installation cost
The cost of labor depends on the shop’s hourly rate and the time required to access and replace the pump, which typically involves removing the rear seat or fuel tank access panel and lowering the tank. Below is a typical price range for labor.
- Labor time: about 2–4 hours for most 2013 Chrysler 300 models.
- Labor rate: common ranges are $75–$150 per hour, depending on region and shop.
- Estimated installed labor cost: roughly $150–$600.
Conclusion: When you combine parts and labor, a typical installed price falls in the $410–$1,120 range, with OEM parts generally at the higher end.
Where to buy and how to compare
Where you shop matters for price, warranties, and availability. Here are common sources to compare fuel pump prices for a 2013 Chrysler 300.
- OEM Mopar parts via dealership or MoparParts.com
- Auto parts retailers: AutoZone, Advance Auto Parts, O'Reilly Auto Parts
- Online retailers and distributors: RockAuto, Amazon Automotive, Parts Geek
- Used or remanufactured units from salvage yards or rebuilders
- Authorized repair shops or service centers for installation and warranty options
Conclusion: Always verify compatibility with your vehicle's VIN and warranty terms and consider whether you want a new OEM part or a high-quality aftermarket option.
Tips to avoid overpay
To keep costs reasonable and ensure a proper repair, consider these tips before buying or scheduling service.
- Verify the exact part number and compatibility with your VIN; confirm whether the unit includes the sending unit and fuel gauge.
- Get multiple quotes from reputable shops, including parts and labor breakdowns.
- Ask about warranties on both parts (typically 1–2 years) and labor.
- Check if the price includes ancillary items (gaskets, clamps, seals) and whether a fluids test or diagnostic is included.
- Assess whether you need a dealer-installed OEM part or if a high-quality aftermarket part is acceptable for your use.
- Be wary of unusually low quotes that may exclude essential components or labor.
Final note: The most reliable price will come from a written estimate listing parts, labor, taxes, and warranty terms. Always verify compatibility with your exact vehicle VIN and engine configuration.
Summary
Prices for a 2013 Chrysler 300 fuel pump vary by part type and installation costs. Expect part prices roughly in the $120–$520 range and labor in the $150–$600 range, with total installed costs typically between about $410 and $1,120 depending on engine, part choice, and local labor rates. Always compare multiple sources, verify VIN compatibility, and check warranties to avoid overpaying.