The fuel pump module for a 2011 Dodge Caliber typically costs about $60 to $450 for the part, with labor bringing the total installed price to roughly $300 to $900 depending on parts and shop rates.
Pricing at a glance
Prices vary widely based on the type of part you buy and where you purchase it. Here’s a quick breakdown to set expectations before shopping:
- Aftermarket new fuel pump module: typically $60–$180.
- Remanufactured OEM-equivalent module: typically $70–$150.
- OEM Mopar genuine module (dealer): typically $250–$450.
- Note: some listings may include the sending unit, fuel filter, or additional components, which can affect the price.
In general, the most affordable option is often an aftermarket new pump, while the most expensive is a genuine OEM unit from a dealer. Always confirm exactly which components are included and check compatibility with your vehicle’s engine (2.0L or 2.4L) and VIN.
Labor and total installed cost
Beyond the price of the part itself, labor is a significant factor. Here is what to expect when budgeting for installation:
- Labor time: about 2 to 4 hours, depending on access to the fuel tank and whether the tank must be drained or dropped.
- Labor rate: commonly $80 to $150 per hour, varying by region and shop.
- Estimated total installed price: roughly $300 to $850, with higher totals if OEM parts are used or if extra diagnostics are required.
- Additional costs: some shops may charge for diagnostic checks, fuel system pressure tests, or core charges on remanufactured units.
Prices can differ based on local labor rates and any additional repairs that may be recommended during service. Always request a written estimate before work begins.
Choosing the right part
Selecting the appropriate fuel pump involves weighing reliability, warranty, and cost. Consider the following when shopping:
New vs. remanufactured vs. OEM
- New aftermarket pumps: typically the most budget-friendly option with solid reliability for many drivers.
- Remanufactured OEM-equivalent pumps: often balance cost and reliability, with warranties that vary by supplier.
- OEM Mopar genuine pumps: offer the best stock-and-fit assurance and dealer warranty, but at a higher price.
Conclusion: If you rely on your Caliber for daily transport and want maximum warranty coverage, OEM is a safe bet; if you’re price-conscious and the part is returning to service reliably, a reputable aftermarket or remanufactured unit is usually adequate.
Where to shop and how to compare
To ensure you get the best price and a correct fit, compare multiple retailers and verify part numbers against your vehicle’s VIN. Useful sources include:
- AutoZone, O'Reilly Auto Parts, Advance Auto Parts
- NAPA Auto Parts
- RockAuto (online with multiple brands)
- Mopar dealership or authorized dealer parts
- Independent repair shops for installation quotes
Pro tip: Always check whether shipping charges apply for online orders and read customer reviews for reliability and warranty terms. Confirm the part number matches the 2011 Caliber’s engine option (2.0L or 2.4L) to avoid compatibility issues.
Summary
For a 2011 Dodge Caliber, the fuel pump module generally costs between $60 and $450 for the part, with total installed prices typically ranging from about $300 to $900 depending on part type, labor rates, and shop policies. Compare several retailers, confirm exact compatibility, and weigh OEM versus aftermarket options to fit your budget and reliability needs. If in doubt, obtain multiple quotes and ask about warranty coverage and core charges.