A new fuel pump assembly for a 2011 Chrysler Town & Country typically costs about $150 to $550 for the part, with installed costs generally between $400 and $1,000 depending on labor rates and whether you choose OEM or aftermarket components.
Understanding the question requires noting that the fuel pump is located inside the fuel tank and that prices vary by part type (new, remanufactured, OEM Mopar vs aftermarket) and by installer. This article breaks down typical price ranges for the pump itself and the labor involved in replacing it, to help you estimate a realistic budget for repair or replacement.
Part price ranges for the fuel pump assembly
Below are typical price ranges you can expect from common retailers and suppliers. The exact price depends on whether you buy a brand-new unit, a remanufactured unit, OEM Mopar, or an aftermarket alternative, as well as the van’s engine configuration and the supplier’s current promotions.
- OEM Mopar new fuel pump assembly: roughly $350–$550
- OEM Mopar remanufactured fuel pump assembly: roughly $200–$350
- Aftermarket new fuel pump assembly (non-OEM brands): roughly $150–$350
- Aftermarket remanufactured fuel pump assembly: roughly $100–$250
- Used/salvage fuel pump assembly: roughly $60–$150
Prices can fluctuate based on supplier, location, and whether the unit includes the full sending unit and fuel pump module. Always confirm compatibility with your specific engine and fuel system configuration before purchasing.
Choosing between OEM and aftermarket
OEM Mopar parts typically carry a warranty and close product specifications to the original equipment, but they can cost more. Aftermarket brands may offer substantial savings but warranties and fit can vary. When evaluating options, consider warranty length, return policy, and reviews from other Town & Country owners with the same engine and model year.
Installed cost considerations
The labor to replace a fuel pump in a 2011 Town & Country often involves draining the tank, dropping the tank or accessing the sending unit, and reinstalling everything with test runs. The following factors influence the final installed price.
- Labor time: commonly 2–4 hours, depending on access and technician experience
- Labor rate: roughly $75–$125 per hour in many regions, higher in urban areas
- Additional parts or services: fuel filter replacement, sending unit seals, clamps, or diagnostic time
- Vehicle condition and location: lifted trucks, difficult access, or remote locations can raise costs
As a rough guide, total installed costs typically range from about $400 to $1,000 or more, depending on part choice and local labor rates. Some shops may quote higher if additional repairs or replacement parts are recommended during the service.
Tips for saving money and making a smart choice
Get multiple quotes and confirm inclusions
Ask for quotes that clearly separate parts and labor, and confirm whether tax, core charges, and shop supplies are included. If a salvage unit is considered, verify compatibility and warranty terms.
Summary
For a 2011 Chrysler Town & Country, expect the fuel pump assembly itself to run roughly $150–$550 depending on OEM vs aftermarket and whether it is new or remanufactured. Installed cost, including labor, generally falls in the $400–$1,000 range, with variations by location, engine configuration, and the chosen supplier. To get an accurate tally, obtain quotes from a few shops and verify exactly what is included in each price.
Where is the fuel pump located on a 2011 Chrysler Town and Country?
Located inside your fuel tank, a fuel pump has a small electric motor to make sure that pressurized gasoline flows to the engine to power the vehicle.
How much is a fuel pump for a Chrysler Town and Country?
The average cost for a Chrysler Town & Country Fuel Pump Replacement is between $1,608 and $1,802. Labor costs are estimated between $169 and $248 while parts are priced between $1,439 and $1,554.
What is a fair price for replacing a fuel pump?
On average, fuel pump replacement costs range between $400 and $1,200. The wide gap is influenced primarily by the type of vehicle you drive and whether you're going through a dealership or a trusted local mechanic. Here's how those costs typically break down: Labor Costs: $150 to $300.
What are the first signs of fuel pump failure?
Signs of a Bad Fuel Pump: What to Look For
- Your Car Won't Start.
- Your Vehicle has a Whining Noise.
- Your Car is Stalling.
- Your Vehicle's Performance is Lacking.
- Your Vehicle's Performance is Better than Expected.
- You're Experiencing Loss of Power, Especially when the Vehicle is Stressed.
- Decreased Fuel Efficiency.