Typically, the A/C compressor itself costs about $150–$600, with installation adding roughly $200–$600, depending on whether you buy new, remanufactured, or aftermarket and your location.
To understand the full picture, it helps to break down the common buying options, what influences price, and the potential extra costs tied to a replacement. The 2015 Jeep Cherokee offered a couple of engine options, and prices can vary accordingly. Always confirm the exact compressor model and refrigerant type your vehicle uses before purchasing.
Part options for a 2015 Jeep Cherokee
Prices vary by the type of compressor and supplier. The following options cover the main routes buyers typically take when replacing a faulty A/C compressor.
- OEM new compressor with clutch (Mopar or factory-equivalent) — typically $350–$650. These are the closest to the original equipment in terms of fit and warranty, and they usually include a warranty from the dealer or original equipment supplier.
- Remanufactured compressor with clutch — typically $180–$320. Lower cost than new OEM, with a warranty, but the unit has been rebuilt and may have different interior components.
- Aftermarket/new replacement compressor — typically $150–$420. Brands such as Denso, UAC, Four Seasons, and similar offer substitutes that fit your Cherokee; warranties vary by brand.
- Used or salvage-yard compressor — typically $60–$150. Lowest upfront cost, but higher risk of wear, unknown history, and limited or no warranty.
Concluding: Your choice depends on budget, reliability preference, and willingness to accept warranty coverage. Checking compatibility with your specific engine and refrigerant type is essential before purchasing.
What affects the price of a 2015 Cherokee compressor
Several factors drive the total cost, from the exact compressor model to the refrigerant used and the scope of required labor.
- Engine and compressor model — The 2015 Cherokee offered multiple engine options (e.g., 2.4L I4 and 3.2L V6), and each may use a slightly different compressor design. Price differences typically reflect the exact unit compatibility and availability.
- Clutch and pulley configuration — Some compressors come with a single integrated clutch; others may differ in clutch type or require a separate clutch kit. This can affect both part price and installation time.
- Refrigerant type — Vehicles originally built for R-134a versus R-1234yf can influence the compressor choice and price. Ensure the replacement matches your system’s refrigerant to avoid compatibility issues.
- Additional system components — Replacing the compressor often requires a new receiver/drier, expansion valve or orifice tube, O-rings, PAG oil, and a vacuum-filling procedure. These add-ons can push the total up by $50–$200+ depending on parts and whether they’re included in a kit.
- Labor costs and location — Labor rates vary widely by region and shop, and the job duration depends on vehicle access, whether the system is already discharged, and if leaks exist. Expect roughly 2–4 hours of labor at typical shop rates, which can range from $75–$150+ per hour.
Concluding: The final price is a combination of the part you choose and the labor required, plus any necessary ancillary parts and refrigerant recharging.
Warranty and installation considerations
New OEM compressors and many remanufactured units commonly come with warranties that can range from 1 to 3 years, sometimes longer with certain brands. Aftermarket units may offer similar or extended warranties, but coverage varies by supplier. Professional installation typically includes evacuating the old refrigerant, flushing the system if needed, installing the new compressor with proper lubrication, replacing the receiver/drier, vacuum-testing, and recharging with the correct refrigerant and oil. Always verify warranty terms and what is covered before purchase, and ensure the shop performs a leak test after installation to prevent repeat failures.
Summary
For a 2015 Jeep Cherokee, expect the compressor part itself to cost roughly $150–$600, with installation running about $200–$600 depending on the shop and region. Your total outlay will hinge on whether you choose a new OEM unit, a remanufactured option, or an aftermarket replacement, plus any required extra parts and refrigerant service. Shopping around, confirming exact compatibility with your engine and refrigerant type, and planning for potential additional components will help you get an accurate, cost-effective replacement. Always obtain multiple quotes and verify warranty terms before committing.