Prices for a 2009 Camry engine vary widely depending on the engine type and the source. In broad terms, expect used engines to start around a few hundred dollars and go up to a couple thousand, rebuilt/remanufactured units to run roughly a few thousand, and new OEM long blocks to be several thousand dollars plus installation. Always factor in labor, shipping, and core charges.
Engine options in the 2009 Camry
The 2009 Camry was offered with two primary powerplants: a 2.4-liter inline-four and a 3.5-liter V6. Each has different price implications when purchased as a replacement engine.
Four-cylinder 2.4L (2AZ-FE)
The 2.4L four-cylinder is the more common Camry engine and generally cheaper to replace than the V6. When shopping for a replacement, you’ll encounter used, rebuilt/remanufactured, and new options, with price ranges detailed below.
V6 3.5L (2GR-FE)
The 3.5L V6 delivers higher horsepower and tends to be more expensive to replace due to the larger engine and parts costs. Price ranges for this variant will typically be higher across all source categories.
Prices for engines vary by source, mileage, warranty, and whether a core charge is included. The following lists provide typical ranges to help benchmark a purchase.
Used engines
- 2.4L (2AZ-FE) used engine: approximately $800–$1,800
- 3.5L (2GR-FE) used engine: approximately $1,500–$3,000
Used engines are the most affordable upfront option, but buyers should carefully assess mileage, internal condition, and warranty terms. Core charges and shipping can affect final pricing.
Remanufactured/rebuilt engines
- 2.4L (2AZ-FE) remanufactured: approximately $2,000–$3,500
- 3.5L (2GR-FE) remanufactured: approximately $3,000–$5,500
Remanufactured engines balance cost and reliability, often including limited warranties. They typically require professional installation and may still involve some ancillary parts replacement.
New OEM engines (long blocks)
- 2.4L (2AZ-FE) new OEM long block: approximately $4,000–$6,000
- 3.5L (2GR-FE) new OEM long block: approximately $6,000–$8,000
New OEM engines are the most expensive option but offer the strongest warranty and longest potential lifespan, with installation costs still applying.
Labor and installation considerations
Installing a replacement engine adds to the base price. Labor rates vary by shop and region, but typical full-installation costs range from about $600 to $1,800, depending on the engine type, whether accessory components (timing chain, water pump, seals) are replaced, and the need for upfront diagnostics.
Where to buy and how to verify
Reliable sourcing is key. Consider these avenues and checks to maximize value and minimize risk:
- Authorized Toyota dealers for new OEM engines or dealer-certified remanufactured units
- Reputable remanufacturers with transparent warranties and core policies
- Salvage yards or online marketplaces, ensuring VIN compatibility and vehicle history
- Request warranty terms, verify engine serial numbers, and confirm that the replacement engine matches your Camry’s VIN and drive configuration
- Assess whether ancillary parts (timing chain, water pump, hoses, sensors) are included or sold separately
Comparing quotes from several suppliers and factoring in installation, shipping, and core charges will help you choose the best overall value for your 2009 Camry.
Summary
For a 2009 Toyota Camry, your engine replacement cost hinges on engine type and source. A 2.4L engine is typically cheaper than the 3.5L V6. The cheapest option is usually a used engine, followed by remanufactured units, with new OEM long blocks being the most expensive. Always factor in labor, core charges, and potential add-ons like timing components and water pumps. Verifying compatibility and warranty terms with reputable suppliers is essential to ensuring a durable repair.