210 horsepower.
The 2007 Dodge Nitro offered a single gasoline engine option in the popular V6 configuration, the 3.7-liter PowerTech V6. This engine is rated at 210 horsepower, with peak torque around 235 lb-ft. The exact output can vary slightly depending on drivetrain (two-wheel drive vs. four-wheel drive) and the transmission pairing, but the published figure for the 3.7L V6 remains 210 hp in most markets.
Engine specs
The most relevant numbers for evaluating the 3.7-liter V6 in the Nitro are summarized below. The figures reflect the factory ratings published by Chrysler/Jeep for the 2007 model year.
- Engine: 3.7 L PowerTech V6
- Horsepower: 210 hp at approximately 5,200 rpm
- Torque: 235 lb-ft at approximately 4,000 rpm
These specifications provide a baseline for performance comparisons with other mid-size SUVs of the era. Real-world results can be influenced by maintenance, payload, and drivetrain configuration.
Notes on real-world performance
In practice, the Nitro’s acceleration and fuel economy depend on whether the vehicle is equipped with rear-wheel drive or four-wheel drive, as well as the transmission in use. The 3.7L V6 pairs with a conventional automatic transmission, and drivetrain losses mean the horsepower at the wheels may be somewhat lower than the engine rating.
Summary
For the 2007 Dodge Nitro, the key horsepower figure to know is 210 hp from the 3.7-liter V6, producing about 235 lb-ft of torque. This rating identifies the Nitro’s performance potential among its peers in the late-2000s mid-size SUV segment.