The 1995 GMC Sierra 1500 with a 5.7-liter V8 is typically rated at about 210 horsepower. This figure comes from GM's late-1990s truck lineup, where the 350 cubic-inch V8 used throttle-body injection in that model year and produced its peak power in the low-to-mid range of the RPM band. Exact output can vary slightly by equipment and axle configuration, but 210 hp is the standard reference for most 1995 Sierra 1500s with the 5.7 L V8.
Engine specs and context
For readers seeking details beyond the headline figure, here are the core specifications and the context in which they appeared on the road in 1995.
Before listing the key figures, note that horsepower ratings can vary slightly depending on the truck’s emission controls, axle gearing, and market specifications.
- Horsepower: 210 hp (157 kW) peak
- Torque: approximately 330 lb-ft (447 N·m)
- Engine configuration: 5.7 L (350 cu in) V8
- Fuel system: throttle-body injection (TBI) used on 1995 trucks
- Displacement: 5.7 liters (350 cubic inches)
In summary, the standard 1995 Sierra 1500 equipped with the 5.7 L V8 delivered about 210 horsepower, with torque in the neighborhood of 330 lb-ft. Variations could occur based on trim, emissions equipment, and axle ratio.
Performance context and history
During the mid-1990s, GM’s 5.7 L V8 in full-size pickups emphasized strong low-end torque for towing and hauling, even as horsepower hovered around the 210 mark. The 1995 setup represents the era just before GM switched to the later Vortec variants, which would boost power in subsequent years.
Summary
The 1995 GMC Sierra 1500 with a 5.7 L V8 is broadly listed at 210 horsepower, with about 330 lb-ft of torque. This single figure reflects the common specification for that model year, though exact numbers can shift with equipment and factory options. For practical purposes, expect roughly 210 hp in most 1995 Sierra 1500 pickups equipped with the 5.7 L V8.