In most cases, replacing wheel bearings on a 2006 Ford F-150 costs about $300–$600 per wheel, with roughly $600–$1,200 for both sides, depending on hub assemblies versus bearings, and local labor rates.
Context and what’s involved
The 2006 F-150 uses front hub assemblies that typically include the bearings and an ABS sensor, while rear bearings are usually integrated into the axle assembly. Replacement usually requires removing the wheel, brake components, and hub or bearing kit, then installing the new part and reinstalling components. Costs can rise if brakes, seals, sensors, or other related parts also need attention.
Cost by location and method
The following breakdown covers the two most common scenarios for a 2006 F-150: front-wheel hub assemblies and rear-wheel bearings. It assumes standard labor rates and does not include potential brake work or alignment charges.
- Front-wheel hub assembly replacement (per wheel): Parts typically $150–$350; labor $100–$300; total commonly $300–$650 per wheel. Some hubs include the ABS sensor, which can affect price.
- Rear-wheel bearing replacement on a solid rear axle (per wheel): Parts typically $150–$350; labor $150–$350; total commonly $300–$700 per wheel. Costs can be higher if the axle or seals must be replaced or if the job is unusually labor-intensive.
For both sides, simply multiply the per-wheel total by two. In practice, most owners see roughly $600–$1,400 for replacing both front wheels or both rear wheels, with higher quotes if additional parts or sensors must be replaced.
What can affect the price
Prices vary widely based on region, shop, and the exact job required. Key factors include whether a hub assembly is used (common) versus replacing bearings only, the presence of ABS components, and whether brakes or seals need replacement during the service.
What to expect at the shop
A typical service flow involves removing the wheel, brake components, and rotor, inspecting the hub/bearing, and replacing with a new hub assembly or bearing kit. The technician may need to press bearings in/out, replace seals, and reconnect any sensors. Some shops will also inspect or replace related brake hardware and perform a quick alignment check if needed.
Summary
Replacing wheel bearings on a 2006 Ford F-150 is a mid-range repair with cost driven mainly by front hub assemblies versus rear axle bearings and by regional labor rates. Expect about $300–$650 per wheel for a front-wheel hub replacement and $300–$700 per wheel for a rear-axle bearing service, with a two-wheel job typically totaling around $600–$1,400. Always obtain a written estimate that outlines parts, labor, and potential extra charges for brakes or sensors.