On the INFINITI G35, a power steering pump replacement typically costs about $500 to $1,000 total, depending on parts and labor.
Prices vary by model year, location, and whether you opt for aftermarket or OEM parts, with additional items such as hoses, the reservoir, or a belt potentially increasing the bill. The final price usually includes parts, labor, and needed fluids or service fees.
Cost breakdown by component
Estimated costs typically break down into parts, labor, and optional add-ons. The following ranges reflect common prices seen at independent shops and dealerships.
- Power steering pump: aftermarket typically $100–$250; OEM/remanufactured $250–$500.
- Labor to remove/install and bleed: 2–4 hours at roughly $75–$125 per hour, about $150–$500 total.
- Associated parts and services: reservoir, hoses, belts, and clamps, roughly $20–$150.
- Fluids and disposal: power steering fluid and disposal fees, about $5–$20.
In practice, expect the total to fall within the ranges shown, with OEM parts pushing the price higher and adding fees such as fluid and belt. Always ask for a written quote including parts and labor.
What affects the final price
Several factors can swing the final bill. Here are the main ones to consider.
Part quality, warranty and availability
Replacement pump type matters: aftermarket vs OEM vs remanufactured. OEM parts typically cost more but may offer better fit and a longer warranty.
- OEM vs aftermarket: price difference can be significant, but reliability and warranty may justify the cost for some owners.
- Warranty: check the pump and labor warranty terms to understand coverage if a problem arises.
Labor rates and shop type
Regional labor rates and whether you go to a dealership or an independent shop can noticeably affect the total.
- Dealerships usually charge higher labor rates than independent shops.
- Some shops offer package deals that include bleeding and a fluid refresh.
Vehicle condition and additional work
Leaks in associated components or the hydraulic lines can require extra parts and time, increasing the price.
- Hoses, reservoir, and high-pressure lines may need replacement or resealing.
- Bleeding the system correctly is essential and can add to labor time.
Bleeding, flushes and fluids
Whether the shop includes bleeding the system or performing a fluid flush can change the final figure.
- Some shops include full power steering fluid replacement and bleeding in the quoted labor; others charge separately.
The final price depends on the scope of work and where you get service. Getting multiple quotes helps ensure you’re paying a fair rate.
DIY considerations and risks
Replacing a power steering pump is generally better left to professionals because of the need to bleed air from the hydraulic system and ensure proper operation. The G35’s V-series V6 layout can present access challenges depending on the model year.
Safety, tools and technique
A successful DIY replacement requires appropriate tools, a safe workspace, and a proper bleeding procedure to avoid steering issues.
- Tools and workspace: belt tensioner tool, pulley remover, and knowledge of the bleeding sequence.
- Bleeding technique: proper purging of air is critical to prevent steering noise or binding.
- Warranty and liability: DIY work may affect any existing or future warranties on components or service.
With the right expertise, some drivers can save on labor, but improper bleeding or installation can create safety risks and costly damage.
Where to shop and how to save
To secure the best price, compare quotes from multiple sources and verify inclusions such as bleeding, fluid and any required hoses. Here are practical steps:
Smart shopping tips
- Call several local auto repair shops and ask for quotes for parts plus labor; clarify whether bleeding/flush is included.
- Ask about OEM vs aftermarket pumps and any available warranty on parts and workmanship.
- Consider independent shops for lower labor rates than dealerships.
- Explore remanufactured or refurbished pumps, balancing cost against reliability and warranty.
By shopping around and clarifying what’s included, you can reduce costs while keeping your G35’s steering system reliable.
Summary
In summary, most INFINITI G35 owners replacing the power steering pump should expect a total out-of-pocket cost in the ballpark of $500 to $1,000, with OEM parts tending to push the price toward the higher end. Prices vary by year, region, and shop, so obtaining current local estimates is essential. Always request a detailed written quote that breaks out parts, labor, and any fluids or ancillary services.