The rear wiper blade for the 2010 Honda CR-V is 11 inches long.
In practice, most US-market 2010 CR‑Vs use an 11-inch rear blade. This length fits the rear window and is compatible with common aftermarket replacements. The exact size is listed in Honda's parts catalogs and the owner's manual, but you can quickly verify it on your own with a simple measurement if needed.
Confirming the correct size
To verify the right size before you buy, follow these steps:
- Open the rear hatch and locate the wiper arm and blade assembly.
- Fully extend the blade and measure from the tip of the blade to the base of the blade where it attaches to the wiper arm (do not include the connector).
- Compare your measurement to common sizes; for a 2010 CR-V, the standard is 11 inches (28 cm).
- If in doubt, refer to the owner's manual or the OEM parts catalog by inputting your VIN.
Verification helps prevent buying the wrong blade and ensures proper contact with the glass for effective clearing.
Bottom line: The 11-inch size is the standard for most 2010 CR-V rear blades, but always confirm if your vehicle has a different configuration.
Replacement options and installation tips
There are multiple choices for replacing an 11-inch rear wiper blade, including OEM Honda replacements and reputable aftermarket brands. The following steps guide selection and installation:
- Choose an 11-inch rear wiper blade compatible with your CR-V’s rear arm and connector type (frame vs. beam blade options vary by brand).
- Remove the old blade by lifting the wiper arm away from the window, pressing the release tab, and sliding the blade out.
- Attach the new blade using the correct adaptor or connector, ensuring it locks firmly in place.
- Lower the wiper arm back to the glass and test the blade with a light spray to confirm proper contact and no gaps.
Tip: When shopping, check consumer reviews for fitment on the 2010 CR-V and look for blades that include a pre-installed adapter for easier installation.
Bottom line: With the 11-inch blade, proper fit and installation yield optimal visibility in adverse weather.
Summary
The 2010 Honda CR-V typically uses an 11-inch rear wiper blade. Always verify by measuring or checking official manuals or parts catalogs, and follow standard installation steps to ensure a secure fit and clear rear visibility.