Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How much does it cost to replace the front axle on a Honda Civic?

On a typical Honda Civic, replacing a single front CV axle costs roughly $300 to $600 in parts and labor, while replacing both front axles can run about $600 to $1,200, depending on parts choices and shop rates.


The question covers the front CV axle—the shaft that transfers power from the transaxle to the wheel via the CV joints. Replacement becomes necessary when a CV joint wears out, a boot tears, or the axle itself is damaged. Prices vary with parts quality, labor rates, and whether additional components like wheel bearings or sensors are involved. The figures below reflect common U.S. pricing as of 2026 and can differ by region and vehicle year.


What affects the cost


Several factors influence the final price for a front axle replacement on a Honda Civic. These include the choice of parts ( aftermarket versus OEM), the labor rate at the shop, whether any extra components are needed, and regional pricing differences.


Additionally, if the axle is seized or the hub bearing is worn, extra parts and labor can push the total higher. Always verify what is included in a quote (axle assembly, wheel hub, sensors) to avoid surprise charges.


Estimated costs


The following ranges reflect typical prices in the United States and illustrate what you might expect for a single axle replacement and for both front axles.


Single front CV axle replacement



  • Parts: aftermarket CV axle assembly typically $40–$180; OEM/Dealer parts typically $150–$350.

  • Labor: about 1–2 hours at a shop rate of roughly $75–$150 per hour, totaling around $75–$300.

  • Optional items: if the hub bearing is worn or the ABS sensor is involved, add $100–$350 for parts and $50–$150 for additional labor.


In most cases, you can expect a single front axle replacement to land in the roughly $300–$600 range, depending on part choice and local labor rates.


Both front CV axles



  • Parts: two CV axles—aftermarket typically $80–$360 per axle; OEM/dealer typically $180–$450 per axle; total parts usually $160–$900.

  • Labor: about 2–4 hours total at $75–$150 per hour, totaling roughly $150–$600.

  • Optional items: if both hubs or bearings are worn, or if sensors are involved, add extra costs for parts and labor.


If both front axles are replaced, the total commonly falls in the $600–$1,200 range, with higher-end OEM or dealership pricing pushing higher.


Factors that affect price


Pricing can vary based on several factors, including:



  • Shop type and location (independent shop vs. dealership; urban vs. rural).

  • Quality of parts (aftermarket vs. OEM) and where you purchase them.

  • Whether additional repairs are needed (hub bearings, ABS sensors, center support bearings).

  • Vehicle year and condition, which can influence required labor time.


Understanding these factors helps set expectations and improves the accuracy of quotes from different shops.


Tips to save money


To keep costs reasonable, consider these strategies:



  • Get multiple, written quotes from independent shops and compare both parts and labor totals.

  • Ask about aftermarket vs. OEM parts and whether the price difference is worth it for your vehicle.

  • Inquire about bundled pricing if both front axles are needed or if other related components are already due for replacement.

  • Check for lifetime or warranty options on parts and labor; sometimes a slightly higher upfront price saves more later.


Planning ahead and shopping around can help you land a fair price without compromising safety or reliability.


Summary


For a Honda Civic, replacing a single front CV axle typically costs about $300 to $600, while replacing both front axles usually falls in the $600 to $1,200 range, depending on parts quality and labor rates. Expect higher prices at dealerships and when additional components like hub bearings or sensors are involved. Always obtain multiple quotes and clarify exactly what is included in each estimate to avoid unexpected charges.

Is it expensive to replace a front axle?


Total Cost of CV Axle Replacement
Replacing a single axle, parts, and labor together can cost between $300 and over $1500, depending on the car.



How do you know if your axle is bad Honda Civic?


If you have a CV axle bad, symptoms can include: Clicking or popping noises. This noise happens especially when making sharp turns, and it's caused by a worn-out joint where the balls inside can't move smoothly anymore. It's most noticeable when accelerating and turning.



Is it worth fixing an axle on a car?


Though perhaps not as commonly understood, axles are as important to a properly functioning vehicle and vehicle safety as the engine, steering system, brakes, and tires are. If an axle does get damaged, have a reputable technician repair it promptly.



Can I drive with a bad front axle?


Continuing to drive on a bad axle can lead to accidents on the road, and we don't recommend it. A bad axle that's about to break will emit a rumbling sound and can even cause the vehicle to vibrate when you speed up. A loud banging or clicking sound while shifting gears might indicate a broken front axle.


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.