In most cases, replacing a single rim for a Honda Accord runs about $150 to $700 for the wheel itself, with mounting and balance adding roughly $20 to $100, and TPMS sensor replacements or resets often adding another $50 to $100 if needed.
Rim prices scale with whether you buy OEM from a dealership or aftermarket designs, the wheel size, and the overall condition of the rim. This article breaks down the factors, provides typical ranges, and offers tips to save money when replacing rims on a Honda Accord.
What affects rim replacement costs
Understanding the main cost drivers helps you budget and compare quotes from shops and dealers.
- OEM vs aftermarket: OEM wheels from Honda dealers are usually pricier than most aftermarket rims, but they guarantee exact fit and finish.
- Wheel size and design: Larger, intricate or multi-spoke designs cost more; 17–19 inch wheels are common on Accords, with 20 inch options mostly aftermarket.
- Material and finish: Aluminum alloy rims are standard; steel wheels are cheaper but heavier and less common on newer trims.
- New vs used or refurbished: New wheels cost the most; take-off or refurbished wheels can save money but carry resale risk.
- TPMS sensors: If your old sensor is damaged or incompatible, you may pay $50–$100 per sensor plus relearning fees.
- Labor and installation: Mounting, balancing, and re-installing sensors typically adds around $20–$60 per wheel.
- Disposal/tire packaging: Some shops charge small disposal or packaging fees; promotions may bundle services.
Across these factors, quotes can vary significantly by region and retailer, so it pays to shop around and ask for a full breakdown in writing.
Typical price ranges for Honda Accord rims
To give a practical sense of what you might pay, here are common ranges seen in 2026, before any labor or tire service.
- OEM Honda Accord wheels: generally $300–$700 per wheel when purchased new from a dealer or authorized retailer. Add $15–$60 for mounting and balancing; TPMS sensor replacements are $50–$100 each if needed.
- Aftermarket alloy wheels: commonly $100–$400 per wheel for basic brands; mid-range wheels run $400–$800; premium or specialty designs can exceed $800–$1,500 per wheel.
- Steel wheels and refurbished/used rims: typically $50–$200 per wheel for used or refurbished options, with variable condition and warranty.
- Labor and ancillary costs: mounting, balancing, and sensor relearn typically $20–$60 per wheel; some shops offer package deals that include tires or sensors.
When you factor in the installation and sensor costs, a single wheel replacement can range from roughly $250 on the low end (steel wheel, basic install, no sensor) to $900 or more for OEM alloy with sensors and professional service.
Ways to save money on rim replacement
Cost-conscious buyers can pursue several strategies to reduce the total bill without compromising safety or fit.
- Shop around for OEM remanufactured or take-off wheels from reputable salvage yards or dealers; ensure wheel condition and specs match.
- Consider refurbished wheels that have been repaired or refinished, often at a fraction of new wheel prices.
- Look for bundled offers that include mounting, balancing, and TPMS services, or promotions for wheel and tire packages.
- Ask if TPMS sensors are included in the package or if a sensor replacement can be avoided by reusing existing sensors in good condition.
- Check regional retailers and online marketplaces for price drops, warranties, and installation options.
By comparing options and timing purchases around sales, you can significantly reduce the per-wheel cost while maintaining compatibility with your Accord’s wheel specs.
Budgeting tips
Tip-driven savings: verify wheel size (19 inch or less for most models), confirm bolt pattern (5x114.3 is common for Honda), and ensure you’re not paying for tires you don’t need when replacing rims. If you already have tires in good condition, ask shops to mount only the wheels and reuse your tires.
Summary
Rim replacement costs for a Honda Accord vary widely based on OEM vs aftermarket, wheel size, and the inclusion of sensors and labor. Expect about $150–$700 per wheel for the wheel itself, plus $20–$60 in mounting and balancing, and $50–$100 per TPMS sensor if needed. In total, a single wheel replacement often lands in the $250–$900 range, with prices rising for premium OEM finishes and larger sizes. Shopping around, considering refurbished or take-off wheels, and asking for bundled services can help you lower the final bill while ensuring proper fit and safety.