The typical pairing for a 1996 Dodge Ram is a 20-inch driver-side blade and an 18-inch passenger-side blade. Exact sizes can vary by cab configuration and whether you have a dual-arm setup, so verify for your specific truck.
Overview of blade sizes for the 1996 Dodge Ram
Common configurations
Below are the typical blade sizes used on the 1996 Dodge Ram, depending on cab configuration. Use this as a quick reference, but confirm by measuring or checking the owner's manual.
- Regular Cab (short bed): Driver-side blade typically 20 inches; passenger-side blade typically 18 inches.
- Club Cab (extended cab): Driver-side blade typically 20 inches; passenger-side blade typically 18 inches.
These sizes cover the most common configurations for the 1996 Ram. Individual trims or aftermarket replacements may differ; always verify before purchase.
How to verify the correct size for your truck
To ensure you purchase the right blades, use any of the following methods:
- Measure the length of the blades currently installed on the vehicle, or remove a blade to measure end-to-end.
- Consult the owner's manual or use a dealership/parts retailer lookup by entering the year, model, and cab style.
- Bring the current blades to an auto parts store to compare directly with a matching-size replacement.
Using these verification steps helps you confirm the exact sizes for your specific 1996 Ram configuration and avoid buying the wrong blades.
Replacement considerations
In addition to length, consider blade type, climate, and compatibility with your wiper arm design. For a classic pickup like the 1996 Ram, many drivers opt for standard beam blades for durability and clear visibility in varying weather.
- Blade type: beam vs. conventional; beam blades are common for older vehicles and often provide better even contact.
- Weather performance: select blades suited to your climate (winter-ready options can resist ice buildup).
- Adapters and fit: ensure the replacement blade includes the correct adapters for your specific wiper arm style.
By considering these factors, you can choose blades that perform reliably across seasons and road conditions.
Summary
For a 1996 Dodge Ram, the typical replacement blade pairing is 20 inches on the driver side and 18 inches on the passenger side. Always confirm the exact sizes based on cab configuration and measurement, and consult the manual or a parts professional if in doubt. Accurate sizing supports optimal visibility and safer driving.