Typically, replacing brake pads and rotors on both axles for a standard passenger car costs about $600 to $1,200, including parts and labor. Luxury or European vehicles can exceed $2,000, while smaller or economy cars may land toward the lower end of the spectrum.
Prices depend on factors like vehicle type, rotor condition, part quality, labor rates in your area, and whether rotors must be replaced or can be resurfaced. This article breaks down what drives the price and how to estimate your bill.
What influences the cost
Several variables determine the final price for a two-axle brake job that includes both pads and rotors.
- Vehicle type and model (compact, sedan, SUV, truck; luxury brands cost more)
- Pad material (organic, semi-metallic, ceramic) and brand
- Rotor type and size (standard, vented, or performance/drilled/slotted rotors)
- Whether rotors must be replaced or can be resurfaced
- Regional labor rates and shop policies
- Number of axles involved (front and rear = two axles)
- Additional components or services (caliper work, wear sensors, brake fluid flush)
Because these factors vary, your final bill can swing widely even for the same service. It’s wise to obtain multiple, itemized quotes to compare parts, labor, and any ancillary fees.
Typical price ranges for a full two-axle brake job
Below are broad ranges you may encounter in many U.S. markets. Exact prices depend on the vehicle and shop.
- Economy/compact cars: about $600–$1,000 total for front and rear brakes and rotors (parts and labor)
- Mid-size cars: about $800–$1,300 total
- Luxury or European brands: about $1,200–$2,000+ total
- SUVs and trucks: about $800–$1,500 total
Note that these ranges assume standard components. Premium rotors, OEM parts, or advanced systems (like electronic wear sensors) can push the price higher, while rotor resurfacing or using economy parts may lower it.
Rotor resurfacing vs rotor replacement
If rotors are within wear limits and not warped, resurfacing can reduce costs. Resurfacing typically costs about $10–$40 per rotor, with labor included in the job. If rotors are too thin or damaged, replacement is required, which aligns with the ranges above. Always have rotors inspected to determine if they meet minimum thickness specs.
Summary
For most drivers, a full two-axle brake job that includes pads and rotors costs roughly $600 to $1,200, though luxury vehicles and special rotor types can push beyond $2,000. The exact price hinges on vehicle type, rotor quality, labor rates, and whether rotors are replaced or resurfaced. To avoid surprises, request written, itemized estimates from several shops and consider discussing rotor resurfacing as an option when appropriate. Regular maintenance and timely inspections can help you budget for these repairs more effectively.
How much does it cost to get all brakes and rotors replaced?
A single caliper can cost up to $130 and several will reach prices even higher. A complete brake repair that includes pads, rotors, and calipers typically averages between $200 and $800 depending on the vehicle and parts used.
Ask about result
How much are the rotors for a 2018 Jeep Renegade?
The average price for a 2018 Jeep Renegade Brake Rotors and Drum at Advance Auto Parts is around $98.43, with a range that starts at $58.99 and goes up to $194.99.
Ask about result
Who makes brake rotors for Lexus?
Akebono and Advics in the ASIN Group and they make ALL Lexus Brake Rotors and Pads. They are also all only made in Japan and the US. Actually, advics high carbon rotors are the OEM rotors They are literally piece to piece, same to stock rotors. My 15 es 350 has 125k miles on it and the rotors are stock advics.
Ask about result
How much do brake pads cost for a Mazda CX-5?
The average price for a 2021 Mazda CX-5 Brake Pads and Shoe at Advance Auto Parts is around $71.94, with a range that starts at $33.99 and goes up to $106.99.
Ask about result