Typically, you’re looking at about $300 to $700 for parts and labor, though DIY can reduce the price significantly.
The Chrysler 200, produced from 2011 to 2017, offered different engines including a 2.4-liter four-cylinder and, on pricier trims, a 3.6-liter V6. Replacement costs vary with engine type, whether you buy a new OEM alternator, a remanufactured unit, or an aftermarket brand, and whether you go through a dealer or an independent shop. Labor times generally range from about 1 to 3 hours depending on access and locale. Prices can vary by region, supplier, and vehicle configuration.
Cost breakdown for the alternator unit
Here is a quick breakdown of typical price ranges for the alternator itself, depending on the source and type.
- New OEM replacement: $180-$350
- Remanufactured unit (rebuilds): $100-$250
- Aftermarket/non-OEM brands: $120-$260
- Core charge (if not included): $20-$60
Prices reflect common U.S. market pricing from auto parts retailers and online vendors. They can vary by region and supplier, and sometimes higher during peak demand or for certain engines.
Labor costs and time to install
Labor time and rates are the other major component of the total bill. Shops charge by the hour, and the Chrysler 200’s alternator is typically accessible without extensive disassembly, though access varies by engine and model year.
- Estimated labor time: 1.5-2.5 hours (independent shops); 1-3 hours at a dealership, depending on diagnostic needs and access
- Hourly labor rate: $75-$125
- Estimated total labor cost: roughly $112-$313
- Potential extra tasks that can add cost: serpentine belt replacement or tensioner, pulley, and related hardware ($20-$100)
Actual labor costs will depend on your location, the shop’s rate, and whether additional parts or services are bundled into the job.
Other factors that influence the total price
Beyond the core part and labor, several factors can shift the final bill up or down.
- Vehicle model and engine type (2.4L vs 3.6L) and the corresponding alternator specification
- Choice of parts retailer or repair shop, including warranties
- Geographic region and local labor rates
- Whether you combine the job with other maintenance (belt replacement, wiring checks, diagnostics) into one visit
Being aware of these elements helps buyers avoid surprise charges and plan their budget more accurately.
Summary
For a Chrysler 200, expect a total replacement cost in the typical range of about $300 to $700, depending on parts choice and labor rates. The most cost-effective approach is often a remanufactured or aftermarket alternator paired with competitive labor pricing from an independent shop. Those who opt for dealer service or OEM parts should anticipate the higher end of the spectrum. Always obtain a written estimate and confirm whether the price includes the core charge, belt inspection, and any needed diagnostics.
Is it cheaper to fix an alternator or replace it?
Even if you trust the workmanship of your mechanic, the time that it would take to repair an alternator would probably cost more than a new alternator, since prices for new units range from $200 to $400 for most models and many are cheaper than that.
How to tell if alternator is bad on a Chrysler 200?
Symptoms of a failing alternator are dim or overly bright lights, a dead battery. strange noises, electrical problems, illuminated warning lights, and engine stalls.
How long does it take to change an alternator on a Chrysler 200?
In most cases, this job takes one to two hours. The alternator attaches to the side of the engine, and is driven by a belt. To remove the alternator, the belt is removed, the wires are disconnected, and the alternator is unbolted from its bracket.
How much is an alternator replacement for a Chrysler 200?
between $688 and $964
The average cost for a Chrysler 200 Alternator Replacement is between $688 and $964 but can vary from car to car.