The replacement usually costs about $60–$150 in total, including parts and labor. If you buy the nozzle alone and do the work yourself, parts typically run about $5–$25, bringing the total down to roughly $5–$60 depending on your vehicle and what tools you already have.
What influences the cost
Several factors determine the final price. The nozzle’s location and type, the vehicle make/model, whether additional hoses or seals must be replaced, and the shop’s labor rate all affect the total.
- Location and type of nozzle: Some cars have hood-mounted jets, others have bumper-mounted or integrated nozzles; replacement can be easier or require bumper/clip work.
- Vehicle design and part sourcing: OEM parts may be pricier, and certain models require exact matched nozzles.
- Labor rates: Rates vary widely by region and shop; urban areas typically cost more.
- Additional parts or tasks: If hoses leak or fittings are damaged, costs rise.
Understanding these factors helps you estimate whether a DIY replacement is feasible for your car or if you should expect professional service.
Typical price ranges
Prices break down into parts, labor, and potential extras. The ranges reflect common scenarios in North America as of 2024–2026.
- Parts: Windshield washer nozzle cost typically $5–$25; some vehicles with special or OEM-only nozzles can be $30–$40.
- Labor: Installation labor generally $40–$120, depending on the complexity and local rates.
- Estimated total: Most customers spend about $45–$145 in total. In some cases with complicated access or additional repairs, total could approach $200.
This range covers standard single-nozzle replacement on common vehicles. If multiple jets need replacement or if bumper/hood removal is required, costs can be higher.
DIY replacement: steps and tips
If you decide to replace the nozzle yourself, here are general steps. Note: consult your vehicle’s service manual for specifics and take appropriate safety precautions.
Before you begin, prepare a clean workspace, and ensure you have the right nozzle for your vehicle.
- Open the hood and locate the windshield washer nozzles (the spray jets on the hood or near the base of the wipers).
- Disconnect the washer hose from the nozzle gently to avoid damaging the hose or fittings.
- Remove the old nozzle from its mounting using the appropriate tool (often a socket, pliers, or screwdriver, depending on the design).
- Install the new nozzle, reattach the hose securely, and ensure the spray pattern is aligned as desired.
- Reconnect the battery if disconnected, test the washer system, and check for leaks or misalignment.
If the nozzle is part of a larger assembly or is difficult to access, consider professional service. DIY replacement is typically straightforward on many modern cars, but some models may require bumper removal or specialized steps.
Summary
Windshield washer nozzle replacement is generally affordable, with DIY options often significantly cheaper than professional service. By understanding where the nozzle is located on your vehicle and what is involved in the replacement, you can decide whether to tackle the job yourself or hire a technician. Always verify compatibility and test the system after replacement.
Can a nozzle be repaired?
Repairing a nozzle might seem straightforward, but it can quickly become a time-consuming challenge without the right tools or experience.
Ask More
Are windshield nozzles universal?
You absolutely should use a nozzle that is vehicle specific and not universal as universal parts are not 100% going to fit or may need modification for desired results, if that is even possible.
Ask More
How much to replace a windshield wiper nozzle?
between $58 and $71
The average cost for a Windshield Washer Nozzle Replacement is between $58 and $71. Labor costs are estimated between $24 and $36 while parts are priced between $34 and $35. This range does not include taxes and fees, and does not factor in your unique location.
Ask More
What is a window washer squirter part called?
Windshield Washer Nozzle (174)
Ask More